Sage Canyon Series

Shelter

Shelter Plus

Shelter Deluxe

*Accessory Wall and Mesh Inner Sold Separately

Sage Canyon Shelter Plus

Sturdy, oversized sun shade and group shelter

"Born from the need for a shelter that stands up to the ample sunshine and sweeping winds of our Colorado home, the Sage Canyon Series is built to last. Big enough to fit over your camp kitchen, and small enough when packed to easily toss in the car, raft, or even backpack, these versatile shelters bring protection to any event. With 100ft² of coverage, the Sage Canyon Shelter Plus offers plenty of room to fit over a picnic table or multiple camp chairs. Steep wall architecture maximizes usable space, and a webbing connection frame offers stability you can rely on. Add on the Accessory Mesh Insert and up to four Accessory Walls (both sold separately) for even more protection and privacy."

Features Specs Materials Reviews Care

Tent and Footprint Cleaning and Care Instructions:

Storage:

Always make sure your tent is dry and free of debris before storing. Fold and roll your tent a different way each time to avoid permanent creases. Store in a cool, dry place. Never leave your tent in hot temperatures (such as a car trunk or attic space) for long periods of time, as it will damage the material coatings. Storing your tent damp can result in mildew growth, which may cause your tent to smell, leak, or delaminate. Mildew damage is not covered under warranty.

Cleaning:

For light cleaning, sponge the product with warm water (not hot).

For more thorough cleaning you will need:

-Wash basin (or bath tub)-Warm water (not hot)

-Waterproof Gear Cleaner (we recommend products like Nikwax Tech Wash)

-Sponge

1. Submerge your gear in warm, clean water. Gently agitate with hands. Empty dirty water. Repeat until most of the excess dirt/grime is removed and water is mostly clear.

2. Apply waterproof gear specific wash and gently work into fabric with sponge.

3. Rinse gear thoroughly.

4. Hang it up to dry.

5. Triple check that your gear is completely dry before storage or use.

*Do not dry clean or machine-wash. Detergents and dry cleaning solvents will damage the fabric and ruin waterproofing.

*Never use hot water, bleach, liquid detergents, or dishwashing liquids.

*Allow to dry COMPLETELY before storage or use.

*Avoid prolonged direct sunlight as UV exposure can compromise waterproofing.

Seam Sealing:

Big Agnes tents are seam sealed as part of our manufacturing process! This seam tape alone is durable enough to prevent water leakage. Any seams that have been taped do not need to be seam sealed with a liquid sealer unless you want extra protection. Make sure the seam-sealer is completely dry before re-packing your tent. Damage caused by misapplication may void warranty.

Zippers:

Keeping your zippers clean will help keep the coils and sliders from wearing out. If filled with dirt, vacuum or brush zippers before storing tent. We recommend Gear Aid Zipper Cleaner and Lubricant.

Repairs and Warranty:

All Big Agnes tents are guaranteed against manufacturing or material defect. We do not warranty products damaged from normal wear and tear, alteration made by owner, misuse, accidents or damages caused by uses other than intended. Damage due to misuse, normal wear and tear, or improper care may be repaired, at the discretion of Big Agnes, at a reasonable charge. Tents returned for repair must be clean and free of debris.

Questions? Call us or open a support case:

877.554.8975 | support.bigagnes.com

Setup

SAGE CANYON PLUS SET UP INSTRUCTIONS

1. Remove contents from stuff sack. Spread shelter over desired campsite.

2. Stake out the four corners. Make sure the webbing harness is flat into each corner and taut. Use the two side release buckles to help remove any twists or tangles in the webbing harness.

3. Assemble the three poles: two long poles and one shorter ridge pole. Ensure each pole section is fully seated into the next by hand instead of allowing the shock cord to snap them together.

4. Starting with the bottom sleeve, feed each of the two long poles through the pole sleeves running diagonally along the top of the shelter.

5. Erect the shelter by inserting the pole tips into the grommets at the four corners, beginning with the topmost pole.

6. Attach the plastic clips on the shelter to the corresponding poles.

7. Insert each end of the shorter ridge pole into the pole pockets on the underside of the fly, at the front and back of the shelter. Then secure the center of the ridgepole with the plastic clip at the apex on the underside of the shelter.

8. Stake out and tension all guylines for best stability, completing set up.

Optional Accessory Wall (sold separately)

Add the Accessory Wall for weather protection and/or privacy. Provides full coverage on side openings, partial coverage on larger front and back openings

1. Attach the toggles on the Accessory Wall to the corresponding loops on the shelter, along the poles and sides. Stake out the lower center point of the wall for more stability as needed.

2. Each side of the Shelter accommodates the Accessory Wall, allowing for customization and multiple walls.

3. Attach the toggles on the top of the Accessory Wall to the corresponding loops on the outside of the shelter and create an awning for more shade.

Optional Accessory Mesh Insert (sold separately)

1. Remove the Mesh Insert from the stuff sack and locate the center toggle at its apex where the seams meet. Connect this to the fabric loop on the underside of the shelter apex (near the ridge pole clip).

2. Attach the toggles of the mesh insert to the fabric loops running along the top seam of the shelter.

3. Working out from the center, attach all remaining toggles on the mesh ceiling and down each corner to the corresponding loops on the shelter.

4. Position the fabric flaps on the bottom of the Mesh Insert to the outside and stakeout for best bug protection and stability.

Separate 6” large diameter pole segment included for emergency field repair. Slide repair pole over the break to act as a splint.

HELPFUL HINTS FOR TENT SET UP

• Our tents are easy to set up but we suggest you practice once at home before
using them for the first time to avoid late night bickering with tent mates while
fumbling around in the dark.
• Before pitching tent, clear campsite of debris that may pierce tent floor.
• We recommend staking out all corners, vestibules and guylines to increase space
and keep your tent from becoming a tumbleweed.
• Hang onto your stuff sacks or they’ll blow away and create backcountry litter.
• Pull on the pole sleeve fabric when inserting poles to avoid any bunching in the
material.
• Push rather than pull poles through pole sleeves.

Thanks for choosing a Big Agnes tent!
Please feel free to contact us if you have any questions or comments.
www.support.bigagnes.com

Download Setup Instructions

All Big Agnes products include a Limited Warranty against manufacturing or material defect.

For additional product questions, please contact our support team.

What's in a Name?

In western Routt County near Hayden, Sage Creek Canyon serves as a narrow gateway into the rapidly rising mountains known as the Flat Tops. The mouth of this canyon overlooks the valley floor and Yampa Valley Regional Airport, which offers the most direct air access to the area.