Tiger Wall UL2 Solution Dye

Artikelnummer: TTWUL221

€330,00 €550,00 Speichern €220

Incl. VAT, Excl. Shipping

* inkl. MwSt.Der Versand wird an der Kasse berechnet

Warranty policy

Product Locator by Locally

Halbfreistehendes, ultraleichtes Drei-Jahreszeiten-Zelt

Das Tiger Wall UL ist ideal für Minimalisten, die ein ultraleichtes Zelt mit Seiteneingang suchen. Hergestellt aus spinndüsengefärbtem Stoff, der sehr beständig gegen UV-Ausbleichen ist, besser für die Umwelt ist und den Energie- und Wasserverbrauch während der Herstellung drastisch reduziert. Die Einzelstangenarchitektur mit DAC Featherlite-Materialien schafft eine einfache, aber starke und robuste Struktur, auf die Sie sich auch bei mehrtägigen Touren verlassen können. Das Tiger Wall UL macht das Zeltleben einfacher und sorgt für Gewichtseinsparungen für Grammzähler bei Ihren Drei-Jahreszeiten-Abenteuern.

Features

Lösungsgefärbter Stoff ist sehr beständig gegen UV-Ausbleichen und reduziert den Energieverbrauch und den Wasserverbrauch bei der Herstellung drastisch, ein Prozess, der besser für die Umwelt ist und die Qualität des Zeltstoffs verbessert

Verfügt über eine Tür, einen Vorraum bei UL1 und zwei Türen, zwei Vorräume bei UL2 und UL3 mit Sturmklappen an allen Vorraumreißverschlüssen

Vereinfachter Aufbau mit proprietärer Zelteckenkonstruktion und einzigartiger TipLok™ Zeltschnalle™, die drei Funktionen vereint: sicheres Festhalten der Stangenspitze, Befestigung und Spannvorrichtung für Regenüberhänge sowie Absteckschlaufe

Einfacher und effizienter Auf- und Abbau mit der stabilen Struktur des DAC Featherlite-Einzelstangensystems

Erhöhter Stauraum mit einem 3D-Behälter-Mezzanine und zusätzlichem Stauraum in der Decke und Türtaschen am Kopfende

Bewahren Sie Telefone oder andere Geräte in den Medientaschen über dem Schlafbereich auf

Halten Sie den Innenraum dank des leicht schließenden Doppelreißverschlusses und des trockenen Eingangs-/Ausgangsvorraums trocken

Mehr nutzbarer Raum zwischen Ihren Füßen und der Zeltwand durch strukturierte Ecken am Fußende

Erhöhter Luftstrom durch niedrige Belüftungsfunktion an den Türen des Vorraums und Doppelschieber an den Reißverschlüssen des Vorraums für die Belüftung von oben oder unten

Bereit zum Aufbau mit vorgeschnittenen Abspannleinen und am Außenzelt befestigten Spannern und zusätzlicher Stabilität durch Klettverschlüsse, die das Außenzelt mit der Stangenstruktur verbinden

Mit reflektierenden Abspannleinen und farblich gekennzeichneten Gurtbändern an den Zeltecken ist der Aufbau zu jeder Tageszeit einfach

Enthält leichtere und dennoch stärkere Dirt Dagger™ UL-Zeltheringe mit zum Patent angemeldeter I-Beam-Aluminiumkonstruktion

Um die Lebensdauer Ihres Zeltbodens zu verlängern, empfehlen wir die Verwendung eines Big Agnes-Fußabdrucks, der separat erhältlich ist

Specs Materials Reviews Care

Tent and Footprint Cleaning and Care Instructions:

Storage:

Always make sure your tent is dry and free of debris before storing. Fold and roll your tent a different way each time to avoid permanent creases. Store in a cool, dry place. Never leave your tent in hot temperatures (such as a car trunk or attic space) for long periods of time, as it will damage the material coatings. Storing your tent damp can result in mildew growth, which may cause your tent to smell, leak, or delaminate. Mildew damage is not covered under warranty.

Cleaning:

For light cleaning, sponge the product with warm water (not hot).

For more thorough cleaning you will need:
-Wash basin (or bath tub)-Warm water (not hot)
-Waterproof Gear Cleaner (we recommend products like Nikwax Tech Wash)
-Sponge

1. Submerge your gear in warm, clean water. Gently agitate with hands. Empty dirty water. Repeat until most of the excess dirt/grime is removed and water is mostly clear.
2. Apply waterproof gear specific wash and gently work into fabric with sponge.
3. Rinse gear thoroughly.
4. Hang it up to dry.
5. Triple check that your gear is completely dry before storage or use.

*Do not dry clean or machine-wash. Detergents and dry cleaning solvents will damage the fabric and ruin waterproofing.
*Never use hot water, bleach, liquid detergents, or dishwashing liquids.
*Allow to dry COMPLETELY before storage or use.
*Avoid prolonged direct sunlight as UV exposure can compromise waterproofing.

Seam Sealing:

Big Agnes tents are seam sealed as part of our manufacturing process! This seam tape alone is durable enough to prevent water leakage. Any seams that have been taped do not need to be seam sealed with a liquid sealer unless you want extra protection. Make sure the seam-sealer is completely dry before re-packing your tent. Damage caused by misapplication may void warranty.

Zippers:

Keeping your zippers clean will help keep the coils and sliders from wearing out. If filled with dirt, vacuum or brush zippers before storing tent. We recommend Gear Aid Zipper Cleaner and Lubricant.

Repairs and Warranty:

All Big Agnes tents are guaranteed against manufacturing or material defect. We do not warranty products damaged from normal wear and tear, alteration made by owner, misuse, accidents or damages caused by uses other than intended. Damage due to misuse, normal wear and tear, or improper care may be repaired, at the discretion of Big Agnes, at a reasonable charge. Tents returned for repair must be clean and free of debris.

Questions? Call us or open a support case:
877.554.8975 | support.bigagnes.com

Setup

TIGER WALL UL SOLUTION DYE SET UP INSTRUCTIONS:

1. Remove contents from stuff sack. Spread out the tent body.
2. Assemble the pole. To ensure each pole section is fully seated, insert each pole section into the next by hand instead of allowing the shock cord to snap them together.
3. Position the assembled pole on top of the tent body. Match the colors of the pole ends with the matching colors of the webbing on the tent body.
4. Insert the pole tips into the grommets at the head and foot of the tent body.
5. Attach the plastic clips on the tent body to the main pole.
6. Clip the ends of the crossover pole into the clear plastic “Ball Cap” connectors that are located on either side of the tent body.
7. Stake out the two cord loops at the head of the tent and the three loops at the foot end.
8. Drape the rainfly over the tent body and match the colors of the webbing on the fly with the webbing on the body.
9. Insert the tips of the crossover pole into the small pockets located on the underside of the rainfly.
10. Attach all Velcro® tabs on the underside of the rainfly to the corresponding pole sections for best stability.
11. Make sure the webbing at the corners of the rainfly is completely slackened. Attach the buckles on the rainfly to those on the tent body.
12. Tighten the webbing on each buckle as needed to keep the rainfly taut.
13. Stake out the one vestibule (UL1) or both vestibules (UL2 & UL3), then stake out all remaining guylines.
14. Low Vent Set Up: For increased ventilation, hook the cord located at the bottom of the vestibule door to the toggle at the top of the zipper located on the underside of the fly.

Separate 6” length pole segment included for emergency field repair. Slide repair pole over the break to act as a splint. Secure splint in place with tape.

FAST FLY SET UP INSTRUCTIONS

If you purchase the optional Big Agnes footprint for your tent, it will enable you to pitch a Fast Fly shelter while leaving the tent body behind. The Fast Fly configuration requires the footprint, tent fly, poles and stakes.

1. Lay the footprint on the ground and stake out the five cord loops.
2. Assemble the pole. To ensure each pole section is fully seated, insert each pole section into the next by hand instead of allowing the shock cord to snap them together.
3. Position the assembled pole on top of the footprint. Match the colors of the pole ends with the matching colors of the webbing on the footprint.
4. Insert the pole tips into the grommets at the head and foot of the footprint.
5. Drape the rainfly over the pole frame. Match the webbing colors on the fly with the matching colors of the webbing on the footprint.
6. Insert the tips of the crossover pole into the small pockets located on the underside of the fly.
7. Attach all Velcro® tabs on the underside of the fly to the corresponding pole sections for best stability.
8. Make sure the webbing at the corners of the rainfly is completely slackened. Attach the buckles on the fly to those on the footprint.
9. Tighten the webbing on each buckle as needed to keep the rainfly taut.
10. Stake out the one vestibule (UL1) or both vestibules (UL2 & UL3), then stake out all remaining guylines.

HELPFUL HINTS FOR TENT SET UP

Our tents are easy to set up, but we suggest you practice once at home before using them for the first time to avoid late night bickering with tent mates while fumbling around in the dark.
Before pitching tent, clear campsite of debris that may pierce tent floor.
We recommend staking out all corners, vestibules and guylines to increase space and ventilation. Securely staking out your tent and all guylines is crucial to maintaining the structural integrity of your tent.
Hang onto your stuff sacks or they’ll blow away and create backcountry litter.
Pull on the pole sleeve fabric when inserting poles to avoid any bunching in the material.
Push rather than pull poles through pole sleeves.

Thanks for choosing a Big Agnes tent!
Please feel free to contact us if you have any questions or comments.
support.bigagnes.com | 877.554.8975

Download Setup Instructions

All Big Agnes products include a Limited Warranty against manufacturing or material defect.

For additional product questions, please contact our support team.

What's in a Name?

Only accessible while floating the Yampa River, this geological masterpiece runs through Dinosaur National Monument just west of Steamboat Springs, Colorado. The Tiger Wall features surreal streaks of black desert varnish known as Navajo Tapestry. It’s tradition for boaters to kiss the wall for luck before navigating the Warm Springs rapid.