Copper Spur HV UL2 Bikepack

SKU: THVCSBP221

€700,00 sauver €0

Incl. VAT, Excl. Shipping

Taxes inclusesFrais d'expédition calculés lors du paiement

Warranty policy

Product Locator by Locally

Tente de bikepacking trois saisons, autoportante et ultralégère

Nos tentes de bikepacking ultralégères primées sont conçues pour des aventures sur route et hors route avec des caractéristiques que vous connaissez de notre ligne de tentes Copper Spur HV UL la plus vendue. Redessinées avec plus de volume intérieur et utilisant des tissus plus solides, plus légers et issus de sources plus durables. La tente Copper Spur HV UL Bikepack est améliorée et équipée des fonctions dont vous avez besoin pour les voyages à deux roues, ainsi que quelques extras comme le vestibule en auvent et notre boucle de tente TipLok™ exclusive pour simplifier l'installation.

Features

Doté d'un ensemble de poteaux Shortstik de 12 pouces, idéal pour être placé sur le guidon, les sacoches et les sacoches, ou pour gagner de la place dans n'importe quel sac

Installation simplifiée avec une construction de coin de tente exclusive et une boucle de tente TipLok™ unique™ qui combine trois fonctions : capture sécurisée de la pointe du poteau, fixation et tendeur du double-toit et boucle d'implantation

Plusieurs configurations de fixation au cadre de vélo pour le sac de compression Burley avec système de sangle en guirlande

Le tissu exclusif en nylon double ripstop ultraléger à deniers mixtes offre une résistance supplémentaire à la déchirure et à la perforation sans ajouter de poids.

Porte à double fermeture éclair à fermeture douce avec tirettes faciles à saisir sur deux portes et deux vestibules de style auvent avec rabats-tempête sur les fermetures éclair du vestibule

Facilité d'entrée grâce à la double porte à fermeture éclair et accès rapide à l'aide d'une seule fermeture éclair, rangez facilement la porte dézippée grâce au gardien de porte Quick Stash sur la porte du corps de la tente.

Rangez votre équipement surdimensionné dans une étagère 3D, en utilisant l'espace mort au-dessus de vos pieds ou rangez en toute sécurité le casque sur le dessus du corps de la tente avec une sangle élastique et utilisez des boucles de sangle en guirlande sur l'extérieur du braguette pour sécher les vêtements et l'équipement mouillés.

Options de rangement optimisées avec une poche de plafond surdimensionnée et plusieurs boucles intérieures pour une utilisation avec des lofts d'équipement, des accessoires et des lampes de tente et de camping mtnGLO®

Les poches multimédias situées au-dessus de la zone de couchage offrent un rangement pratique pour les téléphones et autres appareils

L'empreinte étendue du sac à vélo crée un plancher de vestibule pour le changement et le stockage du matériel au sec et sans saleté - vendu séparément. Également compatible avec l'empreinte standard Copper Spur HV UL

Débit d'air accru et réduction de la condensation grâce à l'évent avec fonction d'aération basse sur les portes du vestibule pour plus de flux d'air tout en offrant une couverture du vestibule

Facile à monter à tout moment de la journée grâce aux haubans réfléchissants et aux sangles à code couleur sur les coins de la tente, stabilité supplémentaire avec des languettes auto-agrippantes qui relient le fly à la structure du poteau, et prêt à monter avec des haubans prédécoupés et des tendeurs attachés au fly

Comprend des piquets de tente Dirt Dagger™ UL plus légers mais plus solides avec une construction brevetée en aluminium I-Beam

Specs Materials Reviews Care

Tent and Footprint Cleaning and Care Instructions:

Storage:

Always make sure your tent is dry and free of debris before storing. Fold and roll your tent a different way each time to avoid permanent creases. Store in a cool, dry place. Never leave your tent in hot temperatures (such as a car trunk or attic space) for long periods of time, as it will damage the material coatings. Storing your tent damp can result in mildew growth, which may cause your tent to smell, leak, or delaminate. Mildew damage is not covered under warranty.

Cleaning:

For light cleaning, sponge the product with warm water (not hot).

For more thorough cleaning you will need:
-Wash basin (or bath tub)-Warm water (not hot)
-Waterproof Gear Cleaner (we recommend products like Nikwax Tech Wash)
-Sponge

1. Submerge your gear in warm, clean water. Gently agitate with hands. Empty dirty water. Repeat until most of the excess dirt/grime is removed and water is mostly clear.
2. Apply waterproof gear specific wash and gently work into fabric with sponge.
3. Rinse gear thoroughly.
4. Hang it up to dry.
5. Triple check that your gear is completely dry before storage or use.

*Do not dry clean or machine-wash. Detergents and dry cleaning solvents will damage the fabric and ruin waterproofing.
*Never use hot water, bleach, liquid detergents, or dishwashing liquids.
*Allow to dry COMPLETELY before storage or use.
*Avoid prolonged direct sunlight as UV exposure can compromise waterproofing.

Seam Sealing:

Big Agnes tents are seam sealed as part of our manufacturing process! This seam tape alone is durable enough to prevent water leakage. Any seams that have been taped do not need to be seam sealed with a liquid sealer unless you want extra protection. Make sure the seam-sealer is completely dry before re-packing your tent. Damage caused by misapplication may void warranty.

Zippers:

Keeping your zippers clean will help keep the coils and sliders from wearing out. If filled with dirt, vacuum or brush zippers before storing tent. We recommend Gear Aid Zipper Cleaner and Lubricant.

Repairs and Warranty:

All Big Agnes tents are guaranteed against manufacturing or material defect. We do not warranty products damaged from normal wear and tear, alteration made by owner, misuse, accidents or damages caused by uses other than intended. Damage due to misuse, normal wear and tear, or improper care may be repaired, at the discretion of Big Agnes, at a reasonable charge. Tents returned for repair must be clean and free of debris.

Questions? Call us or open a support case:
877.554.8975 | support.bigagnes.com

Setup

COPPER SPUR HV UL BIKEPACK SET UP INSTRUCTIONS:

1. Remove contents from stuff sack. Spread out the tent body.
2. Stake out the four corners of the tent body.
3. UL2 & UL3 assemble the two poles: One main pole with a 4-way hub and one short straight crossover pole. UL1 assemble one main pole with two hubs and an attached crossover pole. To ensure each pole section is fully seated insert each pole section into the next by hand, instead of allowing the shock cord to snap them together.
4. Position the assembled main pole on top of the tent body. Match the colors of the pole ends with the matching colors of the webbing on the tent body.
5. Insert the pole tips into the grommets at the four corners of the tent.
6. Attach the plastic clips on the tent body to the main pole.
7. UL2 & UL3 place the crossover pole across the top of the main pole. The crossover pole on UL1 is already attached to the main pole.
8. Clip the ends of the crossover pole into the clear plastic “Ball Cap” clips that are located above the doors of the tent body. UL2 & UL3 attached the center plastic clip on the tent body to the crossover pole.
9. Drape the rainfly over the tent body and match the colors of the webbing on the fly with the webbing on the body.
10. Insert the tips of the crossover pole into the small pockets located on the underside of the fly.
11. Attach all Velcro® tabs on the underside of the fly to the corresponding pole sections for best stability.
12. Make sure the webbing at the corners of the rainfly is completely slackened. Attach the buckles on the rainfly to those on the tent body.
13. Tighten the webbing on each buckle as needed to keep the rainfly taut.
14. Stake out the vestibules then stake out all remaining guylines
15. Low Vent Set Up: For increased ventilation, hook the bottom of the vestibule door to the toggle at the top of the zipper.

Separate 6” length pole segment included for emergency field repair. Slide repair pole over the break to act as a splint. Secure splint in place with tape.

FAST FLY SET UP INSTRUCTIONS:

If you purchase the optional Big Agnes footprint for your tent, it will enable you to pitch a Fast Fly shelter while leaving the tent body behind. The Fast Fly configuration requires the footprint, tent fly, poles and stakes.

1. Lay the footprint on the ground and stake out.
2. UL2 & UL3 assemble the two poles: One main pole with a 4-way hub and one short straight crossover pole. UL1 assemble one main pole with two hubs the crossover pole is attached to the main pole. To ensure each pole section is fully seated insert each pole section into the next by hand, instead of allowing the shock cord to snap them together.
3. Position the assembled main pole on top of the footprint. Match the colors of the pole ends with the matching colors of the webbing on the footprint.
4. Insert the pole tips into the grommets at the four corners of the footprint.
5. UL2 & UL3 insert the tips of the crossover pole into the small pockets located on the underside of the fly.
6. UL2 & UL3 with the crossover pole now attached to the fly drape the rainfly over the pole frame. UL1 drape the rainfly over the pole frame, then insert the tips of the crossover pole into the small pockets located on the underside of the fly.
7. Match the webbing colors on the fly with the matching colors of the webbing on the footprint.
8. Attach all Velcro® tabs on the underside of the fly to the corresponding pole sections for best stability.
9. Make sure the webbing at the corners of the rainfly is completely slackened. Attach the buckles on the fly to those on the footprint.
10. Tighten the webbing on each buckle as needed to keep the rainfly taut.
11. Stake out the vestibules then stake out all remaining guylines.

HELPFUL HINTS FOR TENT SET UP

Our tents are easy to set up, but we suggest you practice once at home before using them for the first time to avoid late night bickering with tent mates while fumbling around in the dark.
Before pitching tent, clear campsite of debris that may pierce tent floor.
We recommend staking out all corners, vestibules and guylines to increase space and ventilation. Securely staking out your tent and all guylines is crucial to maintaining the structural integrity of your tent.
Hang onto your stuff sacks or they’ll blow away and create backcountry litter.
Pull on the pole sleeve fabric when inserting poles to avoid any bunching in the material.
Push rather than pull poles through pole sleeves.

Thanks for choosing a Big Agnes tent!
Please feel free to contact us if you have any questions or comments.
support.bigagnes.com | 877.554.8975

Download Setup Instructions

All Big Agnes products include a Limited Warranty against manufacturing or material defect.

For additional product questions, please contact our support team.

What's in a Name?

The Copper King Mine and Milling Company, established in 1915, ended its reign on a sour note. Stockholders realized too late that the sketchy operation was nothing more than a promotional scam and many took incredible losses. The road to the mine serves as an easy two-track spur off a much larger network of trails just up the hill from our original warehouse.