Features
Le tissu teint dans la masse est très résistant à la décoloration par les UV et réduit considérablement la consommation d'énergie et d'eau lors de la fabrication, un processus meilleur pour l'environnement et améliorant la qualité du tissu de la tente.
Comprend une porte, un vestibule sur UL1 et deux portes, deux vestibules sur UL2 et UL3 avec rabats-tempête sur toutes les fermetures éclair du vestibule.
Installation simplifiée avec une construction de coin de tente exclusive et une boucle de tente TipLok™ unique™ qui combine trois fonctions : capture sécurisée de la pointe du poteau, fixation et tendeur du double-toit et boucle d'implantation
Installation et démontage faciles et efficaces grâce à la solide structure du système unipolaire DAC Featherlite
Rangement surélevé avec bac « mezzanine » 3D et rangement supplémentaire au plafond et poches de porte en tête
Rangez les téléphones ou autres appareils dans les poches multimédias situées au-dessus de la zone de couchage
Gardez l'intérieur au sec grâce à la double fermeture éclair, à fermeture en douceur et au vestibule d'entrée/sortie sec.
Plus d'espace utilisable entre vos pieds et le mur de la tente avec des coins structurés aux extrémités des pieds
Débit d'air accru grâce à une fonction d'aération basse sur les portes du vestibule et à double curseur sur les fermetures éclair du vestibule pour une ventilation par le haut ou le bas.
Prêt à monter avec des haubans prédécoupés et des tendeurs attachés au fly, et une stabilité supplémentaire avec des languettes auto-agrippantes qui relient le fly à la structure du poteau
Facile à monter à tout moment de la journée grâce aux haubans réfléchissants et aux sangles à code couleur sur les coins de la tente
Comprend des piquets de tente Dirt Dagger™ UL plus légers mais plus solides avec une construction en aluminium I-Beam en instance de brevet
Pour prolonger la durée de vie du sol de votre tente, nous vous recommandons d'utiliser une empreinte Big Agnes, vendue séparément
Specs
Materials
Double toit et sol : nylon ripstop teint dans la masse et traité au silicone avec un revêtement en polyuréthane imperméable de 1 200 mm
Corps de la tente : nylon ripstop teint dans la masse, respirant et maille en polyester
Coutures scellées en polyuréthane imperméables et sans solvants (sans PVC ni COV)
Système de poteaux DAC Featherlite NFL et conception de poteaux de moyeu
Lofts à engrenages, vendus séparément : UL1 s'adapte au mur, au triangle et au carré, UL2 s'adapte au triangle, au grand trapèze et au mur, UL3 s'adapte au triangle, au trapèze, au grand trapèze, au mur et au grand mur
Configuration Fast Fly disponible lorsqu'elle est utilisée avec une empreinte compatible
Compatible avec l'empreinte Tiger Wall UL avec boucles de tente TipLok™
Comprend 9 piquets de tente Big Agnes Dirt Dagger™ UL de 6 po
Reviews
We verify some of the reviews and where we do, we label it accordingly. Find more information here.
Care
Tent and Footprint Cleaning and Care Instructions:
Storage:
Always make sure your tent is dry and free of debris before storing. Fold and roll your tent a different way each time to avoid permanent creases. Store in a cool, dry place. Never leave your tent in hot temperatures (such as a car trunk or attic space) for long periods of time, as it will damage the material coatings. Storing your tent damp can result in mildew growth, which may cause your tent to smell, leak, or delaminate. Mildew damage is not covered under warranty.
Cleaning:
For light cleaning, sponge the product with warm water (not hot).
For more thorough cleaning you will need:
-Wash basin (or bath tub)-Warm water (not hot)
-Waterproof Gear Cleaner (we recommend products like Nikwax Tech Wash)
-Sponge
1. Submerge your gear in warm, clean water. Gently agitate with hands. Empty dirty water. Repeat until most of the excess dirt/grime is removed and water is mostly clear.
2. Apply waterproof gear specific wash and gently work into fabric with sponge.
3. Rinse gear thoroughly.
4. Hang it up to dry.
5. Triple check that your gear is completely dry before storage or use.
*Do not dry clean or machine-wash. Detergents and dry cleaning solvents will damage the fabric and ruin waterproofing.
*Never use hot water, bleach, liquid detergents, or dishwashing liquids.
*Allow to dry COMPLETELY before storage or use.
*Avoid prolonged direct sunlight as UV exposure can compromise waterproofing.
Seam Sealing:
Big Agnes tents are seam sealed as part of our manufacturing process! This seam tape alone is durable enough to prevent water leakage. Any seams that have been taped do not need to be seam sealed with a liquid sealer unless you want extra protection. Make sure the seam-sealer is completely dry before re-packing your tent. Damage caused by misapplication may void warranty.
Zippers:
Keeping your zippers clean will help keep the coils and sliders from wearing out. If filled with dirt, vacuum or brush zippers before storing tent. We recommend Gear Aid Zipper Cleaner and Lubricant.
Repairs and Warranty:
All Big Agnes tents are guaranteed against manufacturing or material defect. We do not warranty products damaged from normal wear and tear, alteration made by owner, misuse, accidents or damages caused by uses other than intended. Damage due to misuse, normal wear and tear, or improper care may be repaired, at the discretion of Big Agnes, at a reasonable charge. Tents returned for repair must be clean and free of debris.
Questions? Call us or open a support case:
877.554.8975 | support.bigagnes.com
Setup
TIGER WALL UL SOLUTION DYE SET UP INSTRUCTIONS:
1. Remove contents from stuff sack. Spread out the tent body.
2. Assemble the pole. To ensure each pole section is fully seated, insert each pole section into the next by hand instead of allowing the shock cord to snap them together.
3. Position the assembled pole on top of the tent body. Match the colors of the pole ends with the matching colors of the webbing on the tent body.
4. Insert the pole tips into the grommets at the head and foot of the tent body.
5. Attach the plastic clips on the tent body to the main pole.
6. Clip the ends of the crossover pole into the clear plastic “Ball Cap” connectors that are located on either side of the tent body.
7. Stake out the two cord loops at the head of the tent and the three loops at the foot end.
8. Drape the rainfly over the tent body and match the colors of the webbing on the fly with the webbing on the body.
9. Insert the tips of the crossover pole into the small pockets located on the underside of the rainfly.
10. Attach all Velcro® tabs on the underside of the rainfly to the corresponding pole sections for best stability.
11. Make sure the webbing at the corners of the rainfly is completely slackened. Attach the buckles on the rainfly to those on the tent body.
12. Tighten the webbing on each buckle as needed to keep the rainfly taut.
13. Stake out the one vestibule (UL1) or both vestibules (UL2 & UL3), then stake out all remaining guylines.
14. Low Vent Set Up: For increased ventilation, hook the cord located at the bottom of the vestibule door to the toggle at the top of the zipper located on the underside of the fly.
Separate 6” length pole segment included for emergency field repair. Slide repair pole over the break to act as a splint. Secure splint in place with tape.
FAST FLY SET UP INSTRUCTIONS
If you purchase the optional Big Agnes footprint for your tent, it will enable you to pitch a Fast Fly shelter while leaving the tent body behind. The Fast Fly configuration requires the footprint, tent fly, poles and stakes.
1. Lay the footprint on the ground and stake out the five cord loops.
2. Assemble the pole. To ensure each pole section is fully seated, insert each pole section into the next by hand instead of allowing the shock cord to snap them together.
3. Position the assembled pole on top of the footprint. Match the colors of the pole ends with the matching colors of the webbing on the footprint.
4. Insert the pole tips into the grommets at the head and foot of the footprint.
5. Drape the rainfly over the pole frame. Match the webbing colors on the fly with the matching colors of the webbing on the footprint.
6. Insert the tips of the crossover pole into the small pockets located on the underside of the fly.
7. Attach all Velcro® tabs on the underside of the fly to the corresponding pole sections for best stability.
8. Make sure the webbing at the corners of the rainfly is completely slackened. Attach the buckles on the fly to those on the footprint.
9. Tighten the webbing on each buckle as needed to keep the rainfly taut.
10. Stake out the one vestibule (UL1) or both vestibules (UL2 & UL3), then stake out all remaining guylines.
HELPFUL HINTS FOR TENT SET UP
Our tents are easy to set up, but we suggest you practice once at home before using them for the first time to avoid late night bickering with tent mates while fumbling around in the dark.
Before pitching tent, clear campsite of debris that may pierce tent floor.
We recommend staking out all corners, vestibules and guylines to increase space and ventilation. Securely staking out your tent and all guylines is crucial to maintaining the structural integrity of your tent.
Hang onto your stuff sacks or they’ll blow away and create backcountry litter.
Pull on the pole sleeve fabric when inserting poles to avoid any bunching in the material.
Push rather than pull poles through pole sleeves.
Thanks for choosing a Big Agnes tent!
Please feel free to contact us if you have any questions or comments.
support.bigagnes.com | 877.554.8975
Download Setup Instructions
English (EUR) | EN 
