Kenmerken
Met een 12" Shortstik stokkenset, ideaal voor op het stuur, in fietstassen en zadeltassen, of om ruimte te besparen in een rugzak
Vereenvoudigd opzetten met eigen tenthoekconstructie en unieke TipLok™ Tent Buckle™ die drie functies combineert: veilig vastzetten van de tentstokken, bevestiging en spanner van de regenvlieg en uitzetlus
Meerdere bevestigingsconfiguraties voor fietsframes met burley compressie stuff-sack met ketting-webbing systeem
Exclusieve ultralichte nylon dubbele ripstop, gemengde denier stof biedt extra scheurvastheid en lekbestendigheid zonder extra gewicht
Soepel sluitende deur met twee ritsen met easy-grip ritstrekkers op twee deuren en twee vestibules in luifelstijl met stormflappen op de ritsen van de vestibule
Eenvoudige instap met dubbele ritsdeur en snelle doorgang met slechts één rits, opengeritste deur eenvoudig opbergen met Quick Stash deurbeugel op tentdeur
Berg grote spullen op in de 3D-plank, gebruik de dode ruimte boven uw voeten of berg uw helm veilig op aan de bovenkant van de tent met elastische banden en gebruik de lussen van de banden aan de buitenkant van de buitentent om natte kleding en spullen te drogen
Maximale opbergmogelijkheden met oversized plafondzak en meerdere lussen aan de binnenkant voor gebruik met uitrusting, accessoires en mtnGLO® Tent & Camp Lights
Mediavakken boven het slaapgedeelte bieden handige opbergmogelijkheden voor telefoons en andere apparaten
Verlengde bikepack footprint creëert een vestibule vloer voor droog, vuilvrij omkleden en opslag van spullen - apart verkrijgbaar. Ook compatibel met standaard Copper Spur HV UL Footprint
Verhoogde luchtstroom en minder condensatie door ventilatieopening met lage ventilatieopening op de vestibuledeuren voor meer luchtstroom terwijl de vestibule nog steeds bedekt is
Eenvoudig op te zetten op elk moment van de dag met reflecterende afspanlijnen en kleurgecodeerde banden op de tenthoeken, extra stabiliteit met haak en lus tabs die de buitentent verbinden met de tentstok, en klaar om op te zetten met voorgesneden afspanlijnen en spanners bevestigd aan de buitentent
Inclusief lichtere, maar sterkere Dirt Dagger™ UL tentstokken met gepatenteerde I-Beam aluminium constructie
Specificaties
Materialen
Vlieg en vloer: gepatenteerd ultralicht dubbel ripstop mixed denier waterafstotend silicone behandeld nylon, met solution-dyed ripstop grid en 1200mm waterdichte polyurethaan coating
Tentlichaam: ademend, zelf ontwikkeld ultralicht dubbel ripstop gemengd denier nylon, met in de massa geverfd ripstop-raster en polyestergaas
Waterdichte, oplosmiddelvrije polyurethaan getapete naden (geen PVC of VOC's)
DAC Featherlite NSL-stoksysteem met 4-voudig naafstokontwerp met hoog volume
Compatibel met Large Trapezoid, Wall, Large Wall, Square en Triangle Gear Lofts - apart verkrijgbaar
Copper Hotel UL Accessory Fly, apart verkrijgbaar
Inclusief 8x 6" Big Agnes Dirt Dagger™ UL tentstokken & 2 extra luifelafspanlijnen
Compatibel met Copper Spur HV UL en Copper Spur HV UL Bikepack voetafdrukken met TipLok™ Tent Gespen
Fast Fly Setup beschikbaar
Beoordelingen
We verifiëren sommige beoordelingen en waar dat het geval is, geven we dat ook aan. Hier vind je meer informatie .
Zorg
Tent en Footprint Reinigings- en onderhoudsinstructies:
Opbergen:
Zorg er altijd voor dat uw tent droog en vrij van vuil is voordat u hem opbergt. Vouw en rol de tent elke keer op een andere manier op om permanente kreuken te voorkomen. Bewaar de tent op een koele, droge plaats. Laat uw tent nooit voor langere tijd op een warme plaats staan (zoals in een kofferbak of op een zolder), omdat dit de coating van het materiaal beschadigt. Als u uw tent vochtig opslaat, kan er schimmelvorming optreden, waardoor uw tent kan gaan stinken, lekken of delamineren. Schade door schimmel wordt niet gedekt door de garantie.
Reiniging:
Voor een lichte reiniging spons je het product af met warm water (niet heet).
Voor een grondiger reiniging hebt u het volgende nodig
-wasbak (of badkuip)-warm water (niet heet)
-Waterbestendige Gear Cleaner (wij raden producten aan zoals Nikwax Tech Wash)
-Spons
1. Dompel je uitrusting onder in warm, schoon water. Roer voorzichtig met je handen. Giet het vuile water weg. Herhaal dit totdat het meeste overtollige vuil is verwijderd en het water grotendeels helder is.
2. 2. Breng de waterproof gear specifieke was aan en verwerk de stof voorzichtig met een spons.
3. Spoel de uitrusting grondig uit.
4. Hang ze op om te drogen.
5. Controleer drie keer of je spullen helemaal droog zijn voordat je ze opbergt of gebruikt.
*Geen chemisch reinigen of wassen in de wasmachine. Wasmiddelen en oplosmiddelen voor de stomerij beschadigen de stof en ruïneren de waterdichtheid.
*Gebruik nooit heet water, bleekmiddel, vloeibare wasmiddelen of afwasmiddelen.
*Volledig laten drogen voor opslag of gebruik.
*Vermijd langdurig direct zonlicht, blootstelling aan UV-straling kan de waterdichtheid aantasten.
Naadafdichting:
Big Agnes tenten zijn geseald als onderdeel van ons productieproces! Deze naadtape alleen al is duurzaam genoeg om waterlekkage te voorkomen. Naden die zijn afgeplakt hoeven niet te worden afgedicht met een vloeibare sealer, tenzij je extra bescherming wilt. Zorg ervoor dat de naadafdichting volledig droog is voordat u de tent weer inpakt. Schade door verkeerd aanbrengen kan de garantie doen vervallen.
Ritsen:
Door uw ritsen schoon te houden, voorkomt u dat de windingen en schuivers slijten. Als de ritsen vol zitten met vuil, stofzuig of borstel ze voordat u de tent opbergt. Wij raden Gear Aid ritssluitingsreiniger en -smeermiddel aan.
Reparaties en garantie:
Alle Big Agnes tenten zijn gegarandeerd tegen fabricage- of materiaalfouten. Wij geven geen garantie op producten die beschadigd zijn door normale slijtage, wijzigingen door de eigenaar, verkeerd gebruik, ongelukken of schade veroorzaakt door ander gebruik dan waarvoor ze bedoeld zijn. Schade als gevolg van verkeerd gebruik, normale slijtage of onjuiste verzorging kan naar goeddunken van Big Agnes tegen een redelijke vergoeding worden gerepareerd. Tenten die voor reparatie worden geretourneerd, moeten schoon en vrij van vuil zijn.
Vragen? Bel ons of open een support case:
877.554.8975 | support.bigagnes.com
Setup
COPPER SPUR HV UL BIKEPACK SET UP INSTRUCTIONS:
1. Remove contents from stuff sack. Spread out the tent body.
2. Stake out the four corners of the tent body.
3. UL2 & UL3 assemble the two poles: One main pole with a 4-way hub and one short straight crossover pole. UL1 assemble one main pole with two hubs and an attached crossover pole. To ensure each pole section is fully seated insert each pole section into the next by hand, instead of allowing the shock cord to snap them together.
4. Position the assembled main pole on top of the tent body. Match the colors of the pole ends with the matching colors of the webbing on the tent body.
5. Insert the pole tips into the grommets at the four corners of the tent.
6. Attach the plastic clips on the tent body to the main pole.
7. UL2 & UL3 place the crossover pole across the top of the main pole. The crossover pole on UL1 is already attached to the main pole.
8. Clip the ends of the crossover pole into the clear plastic “Ball Cap” clips that are located above the doors of the tent body. UL2 & UL3 attached the center plastic clip on the tent body to the crossover pole.
9. Drape the rainfly over the tent body and match the colors of the webbing on the fly with the webbing on the body.
10. Insert the tips of the crossover pole into the small pockets located on the underside of the fly.
11. Attach all Velcro® tabs on the underside of the fly to the corresponding pole sections for best stability.
12. Make sure the webbing at the corners of the rainfly is completely slackened. Attach the buckles on the rainfly to those on the tent body.
13. Tighten the webbing on each buckle as needed to keep the rainfly taut.
14. Stake out the vestibules then stake out all remaining guylines
15. Low Vent Set Up: For increased ventilation, hook the bottom of the vestibule door to the toggle at the top of the zipper.
Separate 6” length pole segment included for emergency field repair. Slide repair pole over the break to act as a splint. Secure splint in place with tape.
FAST FLY SET UP INSTRUCTIONS:
If you purchase the optional Big Agnes footprint for your tent, it will enable you to pitch a Fast Fly shelter while leaving the tent body behind. The Fast Fly configuration requires the footprint, tent fly, poles and stakes.
1. Lay the footprint on the ground and stake out.
2. UL2 & UL3 assemble the two poles: One main pole with a 4-way hub and one short straight crossover pole. UL1 assemble one main pole with two hubs the crossover pole is attached to the main pole. To ensure each pole section is fully seated insert each pole section into the next by hand, instead of allowing the shock cord to snap them together.
3. Position the assembled main pole on top of the footprint. Match the colors of the pole ends with the matching colors of the webbing on the footprint.
4. Insert the pole tips into the grommets at the four corners of the footprint.
5. UL2 & UL3 insert the tips of the crossover pole into the small pockets located on the underside of the fly.
6. UL2 & UL3 with the crossover pole now attached to the fly drape the rainfly over the pole frame. UL1 drape the rainfly over the pole frame, then insert the tips of the crossover pole into the small pockets located on the underside of the fly.
7. Match the webbing colors on the fly with the matching colors of the webbing on the footprint.
8. Attach all Velcro® tabs on the underside of the fly to the corresponding pole sections for best stability.
9. Make sure the webbing at the corners of the rainfly is completely slackened. Attach the buckles on the fly to those on the footprint.
10. Tighten the webbing on each buckle as needed to keep the rainfly taut.
11. Stake out the vestibules then stake out all remaining guylines.
HELPFUL HINTS FOR TENT SET UP
Our tents are easy to set up, but we suggest you practice once at home before using them for the first time to avoid late night bickering with tent mates while fumbling around in the dark.
Before pitching tent, clear campsite of debris that may pierce tent floor.
We recommend staking out all corners, vestibules and guylines to increase space and ventilation. Securely staking out your tent and all guylines is crucial to maintaining the structural integrity of your tent.
Hang onto your stuff sacks or they’ll blow away and create backcountry litter.
Pull on the pole sleeve fabric when inserting poles to avoid any bunching in the material.
Push rather than pull poles through pole sleeves.
Thanks for choosing a Big Agnes tent!
Please feel free to contact us if you have any questions or comments.
support.bigagnes.com | 877.554.8975
Installatie-instructies downloaden