Kenmerken
Uitgebreide leefruimte met twee deuren en twee vestibules in luifelstijl, ideaal voor bescherming tegen zon en motregen (UL1 heeft één deur en één vestibule)
Exclusieve ultralichte nylon dubbele ripstop mixed denier stof biedt extra scheurvastheid en doorprikweerstand zonder extra gewicht
DAC stokken met 4-weg, hoog volume hub ontwerp zorgen voor sterkte, stabiliteit en royale leefruimte
Eenvoudige instap door deur met twee ritsen met easy-grip ritstrekkers
Uitgeritste deuren gemakkelijk op te bergen met de Quick Stash deurbeugel op de tentdeur
Veel opbergmogelijkheden met oversized plafondzakken bij het hoofdeinde, 3-D bak bij de voeten en mediavakken boven het slaapgedeelte
Lage ventilatieopeningen bij de vestibuledeuren en een hoge ventilatieopening bij de buitentent zorgen voor luchtstroming om condensatie onder alle weersomstandigheden te verminderen
De gepatenteerde tenthoekconstructie met unieke TipLok™ Tent Buckle™ stroomlijnt het opzetten van de tent door drie functies te combineren: veilig vastzetten van de tentstokken, bevestiging en spanner van de buitentent en uitzetlus
Klaar om op te zetten met voorgesneden afspanlijnen en spanners bevestigd aan de buitentent
Klittenbandlipjes verbinden de buitentent met de tentstokken voor een perfecte plaatsing en extra stabiliteit
Verbeterde zichtbaarheid 's nachts met reflecterende lijnen en banden
Duurzame mtnGLO® Tent Light-technologie, LED-verlichting zorgt voor taakverlichting om spullen te sorteren, kaarten te spelen en rond te hangen met vrienden zonder een verblindende hoofdlamp of lantaarn
Regel de lichtinstellingen met de eenvoudige drukknopcontroller met drie opties: aan, uit en 50% helderheid
Vereist drie AAA-batterijen (niet inbegrepen) om de mtnGLO® lichtregelaar te gebruiken
Specificaties
Materialen
De buitentent en vloer zijn gemaakt van siliconen behandeld ultralicht dubbel ripstop gemengd denier nylon, met een solution-dyed ripstop grid met 1200mm waterdichte polyurethaan coating.
Tentlichaam is ademend eigen ultralicht dubbel ripstop gemengd denier nylon, met een solution-dyed ripstop raster en polyester mesh
Waterdichte, oplosmiddelvrije polyurethaan getapete naden (geen PVC of VOC's)
DAC Featherlite NFL, Featherlite NSL en pressfit stokken
Compatibel met Large Trapezoid, Wall, Large Wall, Square en Triangle lofts, apart verkrijgbaar
Inclusief 8x 6" Big Agnes Dirt Dagger™ UL tentstokken & 2 extra tentafspanlijnen
Compatibel met Copper Spur UL footprints met TipLok™ Tent Buckles
Fast Fly Setup beschikbaar in combinatie met compatibele footprint
Beoordelingen
We verifiëren sommige beoordelingen en waar dat het geval is, geven we dat ook aan. Hier vind je meer informatie .
Zorg
Tent en Footprint Reinigings- en onderhoudsinstructies:
Opbergen:
Zorg er altijd voor dat uw tent droog en vrij van vuil is voordat u hem opbergt. Vouw en rol de tent elke keer op een andere manier op om permanente kreuken te voorkomen. Bewaar de tent op een koele, droge plaats. Laat uw tent nooit voor langere tijd op een warme plaats staan (zoals in een kofferbak of op een zolder), omdat dit de coating van het materiaal beschadigt. Als u uw tent vochtig opslaat, kan er schimmelvorming optreden, waardoor uw tent kan gaan stinken, lekken of delamineren. Schade door schimmel wordt niet gedekt door de garantie.
Reiniging:
Voor een lichte reiniging spons je het product af met warm water (niet heet).
Voor een grondiger reiniging hebt u het volgende nodig
-wasbak (of badkuip)-warm water (niet heet)
-Waterbestendige Gear Cleaner (wij raden producten aan zoals Nikwax Tech Wash)
-Spons
1. Dompel je uitrusting onder in warm, schoon water. Roer voorzichtig met je handen. Giet het vuile water weg. Herhaal dit totdat het meeste overtollige vuil is verwijderd en het water grotendeels helder is.
2. 2. Breng de waterproof gear specifieke was aan en verwerk de stof voorzichtig met een spons.
3. Spoel de uitrusting grondig uit.
4. Hang ze op om te drogen.
5. Controleer drie keer of je spullen helemaal droog zijn voordat je ze opbergt of gebruikt.
*Geen chemisch reinigen of wassen in de wasmachine. Wasmiddelen en oplosmiddelen voor de stomerij beschadigen de stof en ruïneren de waterdichtheid.
*Gebruik nooit heet water, bleekmiddel, vloeibare wasmiddelen of afwasmiddelen.
*Volledig laten drogen voor opslag of gebruik.
*Vermijd langdurig direct zonlicht, blootstelling aan UV-straling kan de waterdichtheid aantasten.
Naadafdichting:
Big Agnes tenten zijn geseald als onderdeel van ons productieproces! Deze naadtape alleen al is duurzaam genoeg om waterlekkage te voorkomen. Naden die zijn afgeplakt hoeven niet te worden afgedicht met een vloeibare sealer, tenzij je extra bescherming wilt. Zorg ervoor dat de naadafdichting volledig droog is voordat u de tent weer inpakt. Schade door verkeerd aanbrengen kan de garantie doen vervallen.
Ritsen:
Door uw ritsen schoon te houden, voorkomt u dat de windingen en schuivers slijten. Als de ritsen vol zitten met vuil, stofzuig of borstel ze voordat u de tent opbergt. Wij raden Gear Aid ritssluitingsreiniger en -smeermiddel aan.
Reparaties en garantie:
Alle Big Agnes tenten zijn gegarandeerd tegen fabricage- of materiaalfouten. Wij geven geen garantie op producten die beschadigd zijn door normale slijtage, wijzigingen door de eigenaar, verkeerd gebruik, ongelukken of schade veroorzaakt door ander gebruik dan waarvoor ze bedoeld zijn. Schade als gevolg van verkeerd gebruik, normale slijtage of onjuiste verzorging kan naar goeddunken van Big Agnes tegen een redelijke vergoeding worden gerepareerd. Tenten die voor reparatie worden geretourneerd, moeten schoon en vrij van vuil zijn.
Vragen? Bel ons of open een support case:
877.554.8975 | support.bigagnes.com
Setup
COPPER SPUR HV UL & HV UL mtnGLO® SET UP INSTRUCTIONS:
1. Remove contents from stuff sack. Spread out the tent body.
2. Stake out the four corners of the tent body.
3. UL2, 3, 4 & 5 assemble the two poles: One main pole with a 4-way hub and one short straight crossover pole. UL1 assemble one main pole with two hubs and an attached crossover pole. To ensure each pole section is fully seated insert each pole section into the next by hand, instead of allowing the shock cord to snap them together.
4. Position the assembled main pole on top of the tent body. Match the colors of the pole ends with the matching colors of the webbing on the tent body.
5. Insert the pole tips into the grommets at the four corners of the tent.
6. Attach the plastic clips on the tent body to the main pole.
7. UL2, 3, 4 & 5 place the crossover pole across the top of the main pole. The crossover pole on UL1 is already attached to the main pole.
8. Clip the ends of the crossover pole into the clear plastic “Ball Cap” clips that are located above the doors of the tent body. UL2 & 3 attached the center plastic clip on the tent body to the crossover pole.
9. Drape the rainfly over the tent body and match the colors of the webbing on the fly with the webbing on the body.
10. Insert the tips of the crossover pole into the small pockets located on the underside of the fly.
11. Attach all Velcro® tabs on the underside of the fly to the corresponding pole sections for best stability.
12. Make sure the webbing at the corners of the rainfly is completely slackened. Attach the buckles on the rainfly to those on the tent body.
13. Tighten the webbing on each buckle as needed to keep the rainfly taut.
14. Stake out the vestibules then stake out all remaining guylines.
15. Low Vent Set Up: For increased ventilation, hook the cord located at the bottom of the vestibule door to the toggle at the top of the zipper located on the underside of the fly.
16. Awning Set Up: Unzip the two zippers at the head-end of the tent, attach extra guylines (included in stake bag) to corner cord loops, adjust trekking poles to desired height, insert trekking pole tips through grosgrain loop or cord loop on corners of panel. Stake out guylines.
Separate 6” length pole segment included for emergency field repair. Slide repair pole over the break to act as a splint. Secure splint in place with tape.
FAST FLY SET UP INSTRUCTIONS:
If you purchase the optional Big Agnes footprint for your tent, it will enable you to pitch a Fast Fly shelter while leaving the tent body behind. The Fast Fly configuration requires the footprint, tent fly, poles and stakes.
1. Lay the footprint on the ground and stake out.
2. UL2, 3, 4 & 5 assemble the two poles: One main pole with a 4-way hub and one short straight crossover pole. UL1 assemble one main pole with two hubs the crossover pole is attached to the main pole. To ensure each pole section is fully seated insert each pole section into the next by hand, instead of allowing the shock cord to snap them together.
3. Position the assembled main pole on top of the footprint. Match the colors of the pole ends with the matching colors of the webbing on the footprint.
4. Insert the pole tips into the grommets at the four corners of the footprint.
5. UL2, 3, 4 & 5 insert the tips of the crossover pole into the small pockets located on the underside of the fly.
6. UL2, 3, 4 & 5 with the crossover pole now attached to the fly drape the rainfly over the pole frame. UL1 drape the rainfly over the pole frame, then insert the tips of the crossover pole into the small pockets located on the underside of the fly.
7. Match the webbing colors on the fly with the matching colors of the webbing on the footprint.
8. Attach all Velcro® tabs on the underside of the fly to the corresponding pole sections for best stability.
9. Make sure the webbing at the corners of the rainfly is completely slackened. Attach the buckles on the fly to those on the footprint.
10. Tighten the webbing on each buckle as needed to keep the rainfly taut. 11. Stake out the vestibules then stake out all remaining guylines.
12. Low Vent Set Up: For increased ventilation, hook the cord located at the bottom of the vestibule door to the toggle at the top of the zipper located on the underside of the fly.
13. Awning Set Up: Unzip the two zippers at the head-end of the tent, attach extra guylines (included in stake bag) to corner cord loops, adjust trekking poles to desired height, insert trekking pole tips through grosgrain loop or cord loop on corners of panel. Stake out guylines.
HELPFUL HINTS FOR TENT SET UP
Our tents are easy to set up, but we suggest you practice once at home before using them for the first time to avoid late night bickering with tent mates while fumbling around in the dark.
Before pitching tent, clear campsite of debris that may pierce tent floor.
We recommend staking out all corners, vestibules and guylines to increase space and ventilation. Securely staking out your tent and all guylines is crucial to maintaining the structural integrity of your tent.
Hang onto your stuff sacks or they’ll blow away and create backcountry litter.
Pull on the pole sleeve fabric when inserting poles to avoid any bunching in the material.
Push rather than pull poles through pole sleeves.
Thanks for choosing a Big Agnes tent!
Please feel free to contact us if you have any questions or comments.
support.bigagnes.com | 877.554.8975
Installatie-instructies downloaden