Features
Erweiterter Wohnraum mit zwei Türen und zwei Vorräumen im Markisenstil, ideal zum Schutz vor Sonne und Nieselregen (UL1 verfügt über eine Tür und einen Vorraum)
Das proprietäre ultraleichte Nylon-Doppel-Ripstop-Mix-Denier-Gewebe bietet zusätzliche Reißfestigkeit und Durchstoßfestigkeit ohne zusätzliches Gewicht
DAC-Stangen mit 4-Wege-Nabendesign mit großem Volumen sorgen für Stabilität, Stabilität und großzügigen Wohnraum
Einfacher Einstieg durch die Tür mit Doppelreißverschluss und leicht zu greifenden Reißverschlussschiebern
Mit dem Quick Stash-Türhalter, der sich an der Zelttür befindet, lassen sich geöffnete Türen ganz einfach verstauen
Reichlich Stauraum mit übergroßen Deckentaschen am Kopfende, 3-D-Behälter an den Füßen und Medientaschen über dem Schlafbereich
Niedrige Belüftungsfunktionen an den Türen des Vorraums sorgen zusammen mit der hohen Belüftungsöffnung für einen Luftstrom, der die Kondensation bei allen Wetterbedingungen reduziert
Die proprietäre Zelteckenkonstruktion mit der einzigartigen TipLok™ Zeltschnalle™ vereinfacht den Zeltaufbau durch die Kombination von drei Funktionen: sicheres Festhalten der Stangenspitze, Befestigung und Spannvorrichtung für ein Regenschutzdach und Absteckschlaufe
Bereit zum Aufbau mit vorgeschnittenen Abspannleinen und zum Fliegen angebrachten Spannern
Haken- und Schlaufenlaschen verbinden das Fliegengitter mit der Stangenstruktur und sorgen so für eine perfekte Neigung und zusätzliche Stabilität
Verbesserte Sichtbarkeit bei Nacht durch reflektierende Abspannleinen und Gurtband
Die robuste mtnGLO®-Zeltlichttechnologie mit LED-Leuchten bietet Arbeitsbeleuchtung zum Ordnen von Ausrüstung, zum Kartenspielen und zum Abhängen mit Freunden, ohne dass ein Scheinwerfer oder eine Laterne blendet
Steuern Sie die Lichteinstellungen mit dem einfachen Druckknopf-Controller mit drei Optionen: Ein, Aus und 50 % Helligkeit
Für den Betrieb des mtnGLO® Lichtcontrollers sind drei AAA-Batterien (nicht im Lieferumfang enthalten) erforderlich
Specs
Materials
Hosenschlitz und Boden bestehen aus silikonbehandeltem, proprietärem, ultraleichtem Double-Ripstop-Mischdenier-Nylon mit einem spinndüsengefärbten Ripstop-Gitter und einer 1200 mm wasserdichten Polyurethan-Beschichtung
Der Zeltkörper besteht aus atmungsaktivem, proprietärem, ultraleichtem Double-Ripstop-Mischdenier-Nylon mit einem spinndüsengefärbten Ripstop-Gitter und Polyesternetz
Wasserdichte, lösungsmittelfreie, mit Polyurethan versiegelte Nähte (kein PVC oder VOCs)
DAC Featherlite NFL, Featherlite NSL und Pressfit-Stangensysteme
Kompatibel mit allen Big Agnes-Ausrüstungs-Lofts, separat erhältlich
Enthält 8x 6" Big Agnes Dirt Dagger™ UL-Zeltheringe und 2 zusätzliche Markisen-Abspannleinen
Kompatibel mit Copper Spur UL-Footprints
mit TipLok™-Zeltschnallen
Fast Fly Setup verfügbar bei Verwendung mit kompatiblem Footprint
Reviews
We verify some of the reviews and where we do, we label it accordingly. Find more information here.
Care
Tent and Footprint Cleaning and Care Instructions:
Storage:
Always make sure your tent is dry and free of debris before storing. Fold and roll your tent a different way each time to avoid permanent creases. Store in a cool, dry place. Never leave your tent in hot temperatures (such as a car trunk or attic space) for long periods of time, as it will damage the material coatings. Storing your tent damp can result in mildew growth, which may cause your tent to smell, leak, or delaminate. Mildew damage is not covered under warranty.
Cleaning:
For light cleaning, sponge the product with warm water (not hot).
For more thorough cleaning you will need:
-Wash basin (or bath tub)-Warm water (not hot)
-Waterproof Gear Cleaner (we recommend products like Nikwax Tech Wash)
-Sponge
1. Submerge your gear in warm, clean water. Gently agitate with hands. Empty dirty water. Repeat until most of the excess dirt/grime is removed and water is mostly clear.
2. Apply waterproof gear specific wash and gently work into fabric with sponge.
3. Rinse gear thoroughly.
4. Hang it up to dry.
5. Triple check that your gear is completely dry before storage or use.
*Do not dry clean or machine-wash. Detergents and dry cleaning solvents will damage the fabric and ruin waterproofing.
*Never use hot water, bleach, liquid detergents, or dishwashing liquids.
*Allow to dry COMPLETELY before storage or use.
*Avoid prolonged direct sunlight as UV exposure can compromise waterproofing.
Seam Sealing:
Big Agnes tents are seam sealed as part of our manufacturing process! This seam tape alone is durable enough to prevent water leakage. Any seams that have been taped do not need to be seam sealed with a liquid sealer unless you want extra protection. Make sure the seam-sealer is completely dry before re-packing your tent. Damage caused by misapplication may void warranty.
Zippers:
Keeping your zippers clean will help keep the coils and sliders from wearing out. If filled with dirt, vacuum or brush zippers before storing tent. We recommend Gear Aid Zipper Cleaner and Lubricant.
Repairs and Warranty:
All Big Agnes tents are guaranteed against manufacturing or material defect. We do not warranty products damaged from normal wear and tear, alteration made by owner, misuse, accidents or damages caused by uses other than intended. Damage due to misuse, normal wear and tear, or improper care may be repaired, at the discretion of Big Agnes, at a reasonable charge. Tents returned for repair must be clean and free of debris.
Questions? Call us or open a support case:
877.554.8975 | support.bigagnes.com
Setup
COPPER SPUR HV UL & HV UL mtnGLO® SET UP INSTRUCTIONS:
1. Remove contents from stuff sack. Spread out the tent body.
2. Stake out the four corners of the tent body.
3. UL2, 3, 4 & 5 assemble the two poles: One main pole with a 4-way hub and one short straight crossover pole. UL1 assemble one main pole with two hubs and an attached crossover pole. To ensure each pole section is fully seated insert each pole section into the next by hand, instead of allowing the shock cord to snap them together.
4. Position the assembled main pole on top of the tent body. Match the colors of the pole ends with the matching colors of the webbing on the tent body.
5. Insert the pole tips into the grommets at the four corners of the tent.
6. Attach the plastic clips on the tent body to the main pole.
7. UL2, 3, 4 & 5 place the crossover pole across the top of the main pole. The crossover pole on UL1 is already attached to the main pole.
8. Clip the ends of the crossover pole into the clear plastic “Ball Cap” clips that are located above the doors of the tent body. UL2 & 3 attached the center plastic clip on the tent body to the crossover pole.
9. Drape the rainfly over the tent body and match the colors of the webbing on the fly with the webbing on the body.
10. Insert the tips of the crossover pole into the small pockets located on the underside of the fly.
11. Attach all Velcro® tabs on the underside of the fly to the corresponding pole sections for best stability.
12. Make sure the webbing at the corners of the rainfly is completely slackened. Attach the buckles on the rainfly to those on the tent body.
13. Tighten the webbing on each buckle as needed to keep the rainfly taut.
14. Stake out the vestibules then stake out all remaining guylines.
15. Low Vent Set Up: For increased ventilation, hook the cord located at the bottom of the vestibule door to the toggle at the top of the zipper located on the underside of the fly.
16. Awning Set Up: Unzip the two zippers at the head-end of the tent, attach extra guylines (included in stake bag) to corner cord loops, adjust trekking poles to desired height, insert trekking pole tips through grosgrain loop or cord loop on corners of panel. Stake out guylines.
Separate 6” length pole segment included for emergency field repair. Slide repair pole over the break to act as a splint. Secure splint in place with tape.
FAST FLY SET UP INSTRUCTIONS:
If you purchase the optional Big Agnes footprint for your tent, it will enable you to pitch a Fast Fly shelter while leaving the tent body behind. The Fast Fly configuration requires the footprint, tent fly, poles and stakes.
1. Lay the footprint on the ground and stake out.
2. UL2, 3, 4 & 5 assemble the two poles: One main pole with a 4-way hub and one short straight crossover pole. UL1 assemble one main pole with two hubs the crossover pole is attached to the main pole. To ensure each pole section is fully seated insert each pole section into the next by hand, instead of allowing the shock cord to snap them together.
3. Position the assembled main pole on top of the footprint. Match the colors of the pole ends with the matching colors of the webbing on the footprint.
4. Insert the pole tips into the grommets at the four corners of the footprint.
5. UL2, 3, 4 & 5 insert the tips of the crossover pole into the small pockets located on the underside of the fly.
6. UL2, 3, 4 & 5 with the crossover pole now attached to the fly drape the rainfly over the pole frame. UL1 drape the rainfly over the pole frame, then insert the tips of the crossover pole into the small pockets located on the underside of the fly.
7. Match the webbing colors on the fly with the matching colors of the webbing on the footprint.
8. Attach all Velcro® tabs on the underside of the fly to the corresponding pole sections for best stability.
9. Make sure the webbing at the corners of the rainfly is completely slackened. Attach the buckles on the fly to those on the footprint.
10. Tighten the webbing on each buckle as needed to keep the rainfly taut. 11. Stake out the vestibules then stake out all remaining guylines.
12. Low Vent Set Up: For increased ventilation, hook the cord located at the bottom of the vestibule door to the toggle at the top of the zipper located on the underside of the fly.
13. Awning Set Up: Unzip the two zippers at the head-end of the tent, attach extra guylines (included in stake bag) to corner cord loops, adjust trekking poles to desired height, insert trekking pole tips through grosgrain loop or cord loop on corners of panel. Stake out guylines.
HELPFUL HINTS FOR TENT SET UP
Our tents are easy to set up, but we suggest you practice once at home before using them for the first time to avoid late night bickering with tent mates while fumbling around in the dark.
Before pitching tent, clear campsite of debris that may pierce tent floor.
We recommend staking out all corners, vestibules and guylines to increase space and ventilation. Securely staking out your tent and all guylines is crucial to maintaining the structural integrity of your tent.
Hang onto your stuff sacks or they’ll blow away and create backcountry litter.
Pull on the pole sleeve fabric when inserting poles to avoid any bunching in the material.
Push rather than pull poles through pole sleeves.
Thanks for choosing a Big Agnes tent!
Please feel free to contact us if you have any questions or comments.
support.bigagnes.com | 877.554.8975
Download Setup Instructions
English (EUR) | EN 
