Features
Refugio de montañismo liviano construido con materiales de campamento base para bombarderos y diseñado para soportar las aventuras más duras en alta montaña.
El color amarillo dorado de la Montaña de Batalla fue solicitado por Chhiring Dorje Sherpa para honrar a la diosa de la prosperidad y la buena fortuna del budismo tibetano, Miyo Losangma. Habita el Monte Everest y es generosa con quienes le muestran su gratitud. Su piel es de color amarillo dorado, por lo que cuando Chhiring instale estas tiendas, se destacarán como un tributo a ella.
Poliéster duradero antidesgarro de alta tenacidad con excepcional resistencia al desgarro, resistencia a los rayos UV y estabilidad durante las fluctuaciones de temperatura y humedad, lo que lo hace ideal para condiciones de gran altitud.
Cuenta con dos puertas y dos vestíbulos.
Dos puertas con doble cremallera y ventanas con dos opciones de cierre: malla solo para ventilación o cremallera de la capa de nailon para un cierre completo.
Con dos opciones de puertas de vestíbulo; una puerta con cremallera simple y una puerta con cremallera doble diseñadas para instalarse como toldo utilizando bastones de trekking
Solapas contra tormentas en la cremallera del vestíbulo.
Las correas y los postes codificados por colores facilitan la instalación.
Los clips giratorios de gran tamaño del DAC se fijan fácilmente al sistema de postes incluso con guantes
Bucles internos altos/bajos para mayor estabilidad en vientos fuertes
Dos rejillas de ventilación para aumentar el flujo de aire y reducir la condensación; Totalmente cerrable en condiciones climáticas extremas.
Los bolsillos para contenedores tridimensionales de gran tamaño brindan un amplio espacio de almacenamiento sin invadir su espacio habitable.
Las pestañas de velcro® conectan la mosca a la estructura del poste proporcionando un paso perfecto y estabilidad adicional.
Listo para lanzar; con tensores y tensores precortados conectados a la mosca
Guylines reflectantes de alta resistencia y correas reflectantes.
Para prolongar la vida útil del piso de su tienda, recomendamos utilizar una huella Big Agnes (se vende por separado)
Múltiples bucles interiores para sujetar accesorios y luces para tiendas y campamentos mtnGLO®
Specs
Materials
Fly es un ripstop de poliéster sin teñir Dominico® fabricado con hilos de alta tenacidad que aumentan la resistencia al desgarro en un 20-25 % en comparación con los tejidos ripstop estándar de nailon o poliéster. También proporciona alta resistencia a los rayos UV y estabilidad durante las fluctuaciones de temperatura y humedad, lo que permite una tienda de campaña sólida y estable.
Fly está tratado con silicona con un revestimiento de poliuretano impermeable de 1200 mm más un revestimiento adicional en la cara de la tela para aumentar la resistencia al desgarro y a los rayos UV.
El suelo es de tafetán de nailon con un revestimiento de poliuretano impermeable de 10.000 mm.
El cuerpo de la tienda es de nailon antidesgarro, transpirable y malla de poliéster.
El material utiliza un proceso de coloración de pigmento único que resiste la decoloración y aumenta la resistencia a los rayos UV; extendiendo la longevidad de la tela cuando se usa en condiciones de gran altitud.
Todas las costuras selladas con cinta de poliuretano impermeable y sin disolventes (sin PVC ni COV)
Sistema de postes DAC NSL con conectores de ajuste a presión y bujes livianos, clips DAC H Clip y Twist sujetan el cuerpo de la tienda al marco del poste
Diseño de poste de buje
2 bolsillos de pared 3-D, 2 bolsillos de malla para la pared, 4 bolsillos de malla para el techo con portales para cableado
Incluye 13 estacas para tienda de campaña Big Agnes Dirt Dagger™ UL de 7,5"; pueden enterrarse como anclajes de hombre muerto
Bucles de replanteo de gran tamaño para utilizar con esquís, piolet, bastones de esquí, etc.
Bucles para engranajes incluidos.
Configuración de vuelo rápido disponible
Incluye loft de equipo
Huella: se vende por separado
Reviews
We verify some of the reviews and where we do, we label it accordingly. Find more information here.
Care
Tent and Footprint Cleaning and Care Instructions:
Storage:
Always make sure your tent is dry and free of debris before storing. Fold and roll your tent a different way each time to avoid permanent creases. Store in a cool, dry place. Never leave your tent in hot temperatures (such as a car trunk or attic space) for long periods of time, as it will damage the material coatings. Storing your tent damp can result in mildew growth, which may cause your tent to smell, leak, or delaminate. Mildew damage is not covered under warranty.
Cleaning:
For light cleaning, sponge the product with warm water (not hot).
For more thorough cleaning you will need:
-Wash basin (or bath tub)-Warm water (not hot)
-Waterproof Gear Cleaner (we recommend products like Nikwax Tech Wash)
-Sponge
1. Submerge your gear in warm, clean water. Gently agitate with hands. Empty dirty water. Repeat until most of the excess dirt/grime is removed and water is mostly clear.
2. Apply waterproof gear specific wash and gently work into fabric with sponge.
3. Rinse gear thoroughly.
4. Hang it up to dry.
5. Triple check that your gear is completely dry before storage or use.
*Do not dry clean or machine-wash. Detergents and dry cleaning solvents will damage the fabric and ruin waterproofing.
*Never use hot water, bleach, liquid detergents, or dishwashing liquids.
*Allow to dry COMPLETELY before storage or use.
*Avoid prolonged direct sunlight as UV exposure can compromise waterproofing.
Seam Sealing:
Big Agnes tents are seam sealed as part of our manufacturing process! This seam tape alone is durable enough to prevent water leakage. Any seams that have been taped do not need to be seam sealed with a liquid sealer unless you want extra protection. Make sure the seam-sealer is completely dry before re-packing your tent. Damage caused by misapplication may void warranty.
Zippers:
Keeping your zippers clean will help keep the coils and sliders from wearing out. If filled with dirt, vacuum or brush zippers before storing tent. We recommend Gear Aid Zipper Cleaner and Lubricant.
Repairs and Warranty:
All Big Agnes tents are guaranteed against manufacturing or material defect. We do not warranty products damaged from normal wear and tear, alteration made by owner, misuse, accidents or damages caused by uses other than intended. Damage due to misuse, normal wear and tear, or improper care may be repaired, at the discretion of Big Agnes, at a reasonable charge. Tents returned for repair must be clean and free of debris.
Questions? Call us or open a support case:
877.554.8975 | support.bigagnes.com
Setup
BATTLE MOUNTAIN 2 & 3 SET UP INSTRUCTIONS
1. Remove contents from stuff sack Spread out the tent body.
2. Stake out the four corners of the tent body.
3. Assemble the pole set. 2P, assemble one main pole with two 3-way hubs, one pole with two NR joints and one pole with one NR joint. 3P, assemble one main pole with two 3-way hubs, two long pre-bent poles and one short pre-bent pole. To ensure each pole section is fully seated insert each pole section into the next by hand, instead of allowing the shock cord to snap them together.
4. Position the main pole on top of the tent body, aligning it so that the hubs are centered over the body and the ridge pole is running parallel to the doors. Match the colors of the pole ends with the matching colors of the webbing on the tent body and insert the tips of the pole into the grommets. Locate the H clips in the middle of the tent, attach them to the disks on the bottom of the hubs.
5. Attach the corresponding DAC twist clips on the tent body to the main pole.
6. 2P; position the pole with two NR joints over the front door. Match the colors of the pole ends with the matching colors of the webbing on the sides of the tent body and insert the tips of the pole into the grommets. Locate the H clips above the door, attach them to the NR joints. Take the remaining pole, position it over the back door. Match the colors of the pole ends with the matching colors of the webbing on the sides of the tent body and insert the tips of the pole into the grommets on the side of the tent. Locate the H clip above the door, attach it to the NR joint.
7. 3P; position one of the longer pre-bent poles over the front door and one over the rear door. Match the colors of the pole ends with the matching colors of the webbing on the sides of the tent body and insert the tips of the pole into the grommets.
8. Attach the remaining DAC twist clips to the poles. Attach the large hooks over both poles at the four pole intersections.
9. Drape the rainfly over the tent body and match the colors of the webbing on the fly with the webbing on the body.
10. Attach all Velcro® tabs on the underside of the fly to the corresponding pole sections for best stability.
11. Make sure the webbing at the corners and sides of the rainfly is completely slackened. Attach the color coded buckles on the fly with the matching color coded buckles on the tent body.
12. 3P; Locate the pole sleeve above the front vestibule door and feed the short pre-bent pole through the sleeve. Insert the pole tips into the second set of grommets at the two front corners of the structure.
13. Tighten the webbing on each buckle as needed to keep the rainfly taut.
14. Stake out the vestibules then stake out all remaining guylines.
Separate 6” length pole segment included for emergency field repair. Slide repair pole over the break to act as a splint.Secure splint in place with tape.
FAST FLY SET UP INSTRUCTIONS
If you purchase the optional Big Agnes footprint for your tent, it will enable you to pitch a Fast Fly shelter while leaving the tent body behind. The Fast Fly configuration requires the footprint, tent fly, poles and stakes.
1. Lay the footprint on the ground and stake out.
2. Assemble the pole set. 2P, assemble one main pole with two 3-way hubs, one pole with two NR joints and one pole with one NR joint. 3P, assemble one main pole with two 3-way hubs, two long pre-bent poles and one short pre-bent pole. To ensure each pole section is fully seated insert each pole section into the next by hand, instead of allowing the shock cord to snap them together.
3. Position the main pole on top of the footprint, aligning it so that the ridge pole is running parallel to the front and back of the footprint. Insert the pole tips into the corner grommets.
4. 2P; position the pole with two NR joints over the head end of the main pole. Match the colors of the pole ends with the matching colors of the webbing on the sides of the footprint and insert the tips of the pole into the grommets. Take the remaining pole, position it over the foot end of the main pole. Match the colors of the pole ends with the matching colors of the webbing on the sides of the footprint and insert the tips of the pole into the grommets on the side of the footprint.
5. 3P; position one of the longer pre-bent poles over the head end of the main pole. Match the colors of the pole ends with the matching colors of the webbing on the sides of the footprint and insert the tips of the pole into the grommets. Repeat the step with the second of the longer pre-bent poles over the foot end of the main pole.
6. Drape the rainfly over the pole frame. Match the webbing colors on the fly with the matching colors of the webbing on the footprint.
7. Attach all Velcro® tabs on the underside of the fly to the corresponding pole sections for best stability.
8. Make sure the webbing at the corners and sides of the rainfly is completely slackened. Attach the buckles on the fly to those on the footprint.
9. 3P; Locate the pole sleeve above the front vestibule door and feed the short pre-bent pole through the sleeve. Insert the pole tips into the second set of grommets at the two front corners of the footprint.
10. Tighten the webbing on each buckle as needed to keep the rainfly taut.
11. Stake out the vestibules then stake out all remaining guylines.
HELPFUL HINTS FOR TENT SET UP
Our tents are easy to set up but we suggest you practice once at home before using them for the first time to avoid late night bickering with tent mates while fumbling around in the dark.
Before pitching tent, clear campsite of debris that may pierce tent floor.
We recommend staking out all corners, vestibules and guylines to increase space and ventilation. Securely staking out your tent and all guylines is crucial to maintaining the structural integrity of your tent.
Hang onto your stuff sacks or they’ll blow away and create backcountry litter.
Pull on the pole sleeve fabric when inserting poles to avoid any bunching in the material.
Push rather than pull poles through pole sleeves.
Thanks for choosing a Big Agnes tent!
Please feel free to contact us if you have any questions or comments.
support.bigagnes.com | 877.554.8975
Download Setup Instructions
English (EUR) | EN 
