Tienda de campaña ultraligera independiente para tres estaciones
Nuestros refugios para mochileros ultraligeros, con todas las funciones y más vendidos, la galardonada serie Copper Spur UL, están diseñados con un centro de gran volumen para maximizar la resistencia y aumentar el espacio habitable sin agregar peso. Con puertas dobles con vestíbulos estilo toldo y materiales patentados que son más livianos, más resistentes y están equipados con herrajes que facilitan aún más la instalación. Su mejor hogar UL lejos del hogar.
Espacio habitable ampliado con dos puertas y dos vestíbulos estilo toldo, ideal para protegerse del sol y la llovizna (UL1 cuenta con una puerta y un vestíbulo)
El tejido patentado de nailon ultraligero de doble denier mixto ripstop ofrece resistencia adicional al desgarro y a las perforaciones sin agregar peso.
Los postes DAC con Angle Hubs y el diseño de postes cruzados adjuntos brindan resistencia, estabilidad y un generoso espacio habitable.
Fácil entrada a través de una puerta con doble cremallera y tiradores de cremallera de fácil agarre.
Guarde fácilmente las puertas abiertas con el seguro de puerta Quick Stash, ubicado en la puerta del cuerpo de la tienda.
Amplias opciones de almacenamiento con bolsillos de gran tamaño en el techo en la cabecera, compartimiento tridimensional en los pies y bolsillos para dispositivos multimedia ubicados sobre el área para dormir
Las características de ventilación baja en las puertas del vestíbulo junto con la ventilación alta crean un flujo de aire para reducir la condensación en todas las condiciones climáticas.
La construcción patentada de las esquinas de la tienda con la exclusiva TipLok™ Tent Buckle™ agiliza el montaje de la tienda al combinar tres funciones: captura segura de la punta del poste, fijación y tensor de la mosca de la lluvia y bucle de replanteo.
Listo para lanzar con vientos precortados y tensores conectados al vuelo.
Las pestañas de gancho y bucle conectan la mosca a la estructura del poste proporcionando un paso perfecto y estabilidad adicional.
Visibilidad mejorada por la noche con correas y correas reflectantes.
Conecte lofts de equipo, accesorios y luces para tiendas y campamentos mtnGLO® con múltiples bucles interiores
Para prolongar la vida útil del piso de su tienda, recomendamos utilizar una huella Big Agnes (se vende por separado)
La bragueta y el piso son de nailon de denier mixto ultraligero, de doble antidesgarro, tratado con silicona y con una rejilla antidesgarro teñida en solución con un revestimiento de poliuretano impermeable de 1200 mm.
El cuerpo de la tienda es de nailon de denier mixto, ultraligero, transpirable y patentado, con una rejilla antidesgarros teñida en solución y una malla de poliéster.
Costuras selladas de poliuretano impermeables y sin disolventes (sin PVC ni COV)
DAC Featherlite NFL, Featherlite NSL y sistemas de postes Pressfit
Compatible con lofts de pared, triangulares y cuadrados, se venden por separado
Incluye 8 estacas para tienda de campaña Big Agnes Dirt Dagger™ UL de 6" y 2 tensores de toldo adicionales
Compatible con huellas Copper Spur UL con hebillas para tienda TipLok™
Configuración Fast Fly disponible cuando se usa con una huella compatible
Tent and Footprint Cleaning and Care Instructions:
Storage:
Always make sure your tent is dry and free of debris before storing. Fold and roll your tent a different way each time to avoid permanent creases. Store in a cool, dry place. Never leave your tent in hot temperatures (such as a car trunk or attic space) for long periods of time, as it will damage the material coatings. Storing your tent damp can result in mildew growth, which may cause your tent to smell, leak, or delaminate. Mildew damage is not covered under warranty.
Cleaning:
For light cleaning, sponge the product with warm water (not hot).
For more thorough cleaning you will need:
-Wash basin (or bath tub)-Warm water (not hot)
-Waterproof Gear Cleaner (we recommend products like Nikwax Tech Wash)
-Sponge
1. Submerge your gear in warm, clean water. Gently agitate with hands. Empty dirty water. Repeat until most of the excess dirt/grime is removed and water is mostly clear.
2. Apply waterproof gear specific wash and gently work into fabric with sponge.
3. Rinse gear thoroughly.
4. Hang it up to dry.
5. Triple check that your gear is completely dry before storage or use.
*Do not dry clean or machine-wash. Detergents and dry cleaning solvents will damage the fabric and ruin waterproofing.
*Never use hot water, bleach, liquid detergents, or dishwashing liquids.
*Allow to dry COMPLETELY before storage or use.
*Avoid prolonged direct sunlight as UV exposure can compromise waterproofing.
Seam Sealing:
Big Agnes tents are seam sealed as part of our manufacturing process! This seam tape alone is durable enough to prevent water leakage. Any seams that have been taped do not need to be seam sealed with a liquid sealer unless you want extra protection. Make sure the seam-sealer is completely dry before re-packing your tent. Damage caused by misapplication may void warranty.
Zippers:
Keeping your zippers clean will help keep the coils and sliders from wearing out. If filled with dirt, vacuum or brush zippers before storing tent. We recommend Gear Aid Zipper Cleaner and Lubricant.
Repairs and Warranty:
All Big Agnes tents are guaranteed against manufacturing or material defect. We do not warranty products damaged from normal wear and tear, alteration made by owner, misuse, accidents or damages caused by uses other than intended. Damage due to misuse, normal wear and tear, or improper care may be repaired, at the discretion of Big Agnes, at a reasonable charge. Tents returned for repair must be clean and free of debris.
Questions? Call us or open a support case:
877.554.8975 | support.bigagnes.com
COPPER SPUR HV UL & HV UL mtnGLO® SET UP INSTRUCTIONS:
1. Remove contents from stuff sack. Spread out the tent body.
2. Stake out the four corners of the tent body.
3. UL2, 3, 4 & 5 assemble the two poles: One main pole with a 4-way hub and one short straight crossover pole. UL1 assemble one main pole with two hubs and an attached crossover pole. To ensure each pole section is fully seated insert each pole section into the next by hand, instead of allowing the shock cord to snap them together.
4. Position the assembled main pole on top of the tent body. Match the colors of the pole ends with the matching colors of the webbing on the tent body.
5. Insert the pole tips into the grommets at the four corners of the tent.
6. Attach the plastic clips on the tent body to the main pole.
7. UL2, 3, 4 & 5 place the crossover pole across the top of the main pole. The crossover pole on UL1 is already attached to the main pole.
8. Clip the ends of the crossover pole into the clear plastic “Ball Cap” clips that are located above the doors of the tent body. UL2 & 3 attached the center plastic clip on the tent body to the crossover pole.
9. Drape the rainfly over the tent body and match the colors of the webbing on the fly with the webbing on the body.
10. Insert the tips of the crossover pole into the small pockets located on the underside of the fly.
11. Attach all Velcro® tabs on the underside of the fly to the corresponding pole sections for best stability.
12. Make sure the webbing at the corners of the rainfly is completely slackened. Attach the buckles on the rainfly to those on the tent body.
13. Tighten the webbing on each buckle as needed to keep the rainfly taut.
14. Stake out the vestibules then stake out all remaining guylines.
15. Low Vent Set Up: For increased ventilation, hook the cord located at the bottom of the vestibule door to the toggle at the top of the zipper located on the underside of the fly.
16. Awning Set Up: Unzip the two zippers at the head-end of the tent, attach extra guylines (included in stake bag) to corner cord loops, adjust trekking poles to desired height, insert trekking pole tips through grosgrain loop or cord loop on corners of panel. Stake out guylines.
Separate 6” length pole segment included for emergency field repair. Slide repair pole over the break to act as a splint. Secure splint in place with tape.
FAST FLY SET UP INSTRUCTIONS:
If you purchase the optional Big Agnes footprint for your tent, it will enable you to pitch a Fast Fly shelter while leaving the tent body behind. The Fast Fly configuration requires the footprint, tent fly, poles and stakes.
1. Lay the footprint on the ground and stake out.
2. UL2, 3, 4 & 5 assemble the two poles: One main pole with a 4-way hub and one short straight crossover pole. UL1 assemble one main pole with two hubs the crossover pole is attached to the main pole. To ensure each pole section is fully seated insert each pole section into the next by hand, instead of allowing the shock cord to snap them together.
3. Position the assembled main pole on top of the footprint. Match the colors of the pole ends with the matching colors of the webbing on the footprint.
4. Insert the pole tips into the grommets at the four corners of the footprint.
5. UL2, 3, 4 & 5 insert the tips of the crossover pole into the small pockets located on the underside of the fly.
6. UL2, 3, 4 & 5 with the crossover pole now attached to the fly drape the rainfly over the pole frame. UL1 drape the rainfly over the pole frame, then insert the tips of the crossover pole into the small pockets located on the underside of the fly.
7. Match the webbing colors on the fly with the matching colors of the webbing on the footprint.
8. Attach all Velcro® tabs on the underside of the fly to the corresponding pole sections for best stability.
9. Make sure the webbing at the corners of the rainfly is completely slackened. Attach the buckles on the fly to those on the footprint.
10. Tighten the webbing on each buckle as needed to keep the rainfly taut. 11. Stake out the vestibules then stake out all remaining guylines.
12. Low Vent Set Up: For increased ventilation, hook the cord located at the bottom of the vestibule door to the toggle at the top of the zipper located on the underside of the fly.
13. Awning Set Up: Unzip the two zippers at the head-end of the tent, attach extra guylines (included in stake bag) to corner cord loops, adjust trekking poles to desired height, insert trekking pole tips through grosgrain loop or cord loop on corners of panel. Stake out guylines.
HELPFUL HINTS FOR TENT SET UP
Our tents are easy to set up, but we suggest you practice once at home before using them for the first time to avoid late night bickering with tent mates while fumbling around in the dark.
Before pitching tent, clear campsite of debris that may pierce tent floor.
We recommend staking out all corners, vestibules and guylines to increase space and ventilation. Securely staking out your tent and all guylines is crucial to maintaining the structural integrity of your tent.
Hang onto your stuff sacks or they’ll blow away and create backcountry litter.
Pull on the pole sleeve fabric when inserting poles to avoid any bunching in the material.
Push rather than pull poles through pole sleeves.
Thanks for choosing a Big Agnes tent!
Please feel free to contact us if you have any questions or comments.
La Copper King Mine and Milling Company, fundada en 1915, terminó su reinado con una nota amarga. Los accionistas se dieron cuenta demasiado tarde de que la operación incompleta no era más que una estafa promocional y muchos sufrieron pérdidas increíbles. El camino a la mina sirve como un sencillo ramal de dos vías que sale de una red mucho más grande de senderos justo arriba de la colina desde nuestro almacén original.