Features
La tela teñida en solución es altamente resistente a la decoloración por rayos UV y reduce drásticamente el consumo de energía y el uso de agua durante la fabricación, un proceso que es mejor para el medio ambiente y mejora la calidad de la tela de la tienda.
Cuenta con una puerta, un vestíbulo en UL1 y dos puertas, dos vestíbulos en UL2 y UL3 con solapas contra tormentas en todas las cremalleras del vestíbulo.
Configuración simplificada con construcción de esquina patentada para tienda de campaña y exclusiva hebilla para tienda TipLok™™ que combina tres funciones: captura segura de la punta del poste, fijación y tensor de mosca de lluvia y bucle de replanteo.
Instalación y desmontaje fácil y eficiente con la sólida estructura del sistema unipolar DAC Featherlite
Almacenamiento elevado con un "entrepiso" de contenedores 3D y almacenamiento adicional en el techo y bolsillos en las puertas en la cabecera.
Guarde los teléfonos u otros dispositivos en los bolsillos multimedia ubicados encima del área para dormir
Mantenga el interior seco con doble cremallera, cierre suave y vestíbulo de entrada/salida seco.
Más espacio utilizable entre los pies y la pared de la tienda con esquinas estructuradas en los pies
Mayor flujo de aire con función de ventilación baja en las puertas del vestíbulo y controles deslizantes dobles en las cremalleras del vestíbulo para ventilación desde arriba o abajo
Listo para lanzar con tensores y tensores precortados conectados a la mosca, y estabilidad adicional con lengüetas de gancho y bucle que conectan la mosca a la estructura del poste.
Fácil de montar en cualquier momento del día con vientos reflectantes y correas codificadas por colores en las esquinas de la tienda.
Incluye estacas para tienda de campaña UL Dirt Dagger™ más ligeras pero más resistentes con construcción de aluminio I-Beam pendiente de patente.
Para prolongar la vida útil del piso de su tienda, recomendamos utilizar una base Big Agnes, que se vende por separado.
Specs
Materials
Mosca y piso: ripstop de nailon tratado con silicona y teñido en solución con un revestimiento de poliuretano impermeable de 1200 mm
Cuerpo de la tienda: nailon ripstop teñido en solución transpirable y malla de poliéster.
Costuras selladas de poliuretano impermeables y sin disolventes (sin PVC ni COV)
Sistema de postes DAC Featherlite NFL y diseño de postes de cubo
Lofts de engranajes, se venden por separado: UL1 se adapta a pared, triángulo y cuadrado, UL2 se adapta a triángulo, trapezoide grande y pared, UL3 se adapta a triángulo, trapezoide, trapezoide grande, pared y pared grande
Configuración Fast Fly disponible cuando se usa con una huella compatible
Compatible con Tiger Wall UL Footprint con hebillas para tienda TipLok™
Incluye estacas para tienda de campaña Big Agnes Dirt Dagger™ UL de 9x 6"
Reviews
We verify some of the reviews and where we do, we label it accordingly. Find more information here.
Care
Tent and Footprint Cleaning and Care Instructions:
Storage:
Always make sure your tent is dry and free of debris before storing. Fold and roll your tent a different way each time to avoid permanent creases. Store in a cool, dry place. Never leave your tent in hot temperatures (such as a car trunk or attic space) for long periods of time, as it will damage the material coatings. Storing your tent damp can result in mildew growth, which may cause your tent to smell, leak, or delaminate. Mildew damage is not covered under warranty.
Cleaning:
For light cleaning, sponge the product with warm water (not hot).
For more thorough cleaning you will need:
-Wash basin (or bath tub)-Warm water (not hot)
-Waterproof Gear Cleaner (we recommend products like Nikwax Tech Wash)
-Sponge
1. Submerge your gear in warm, clean water. Gently agitate with hands. Empty dirty water. Repeat until most of the excess dirt/grime is removed and water is mostly clear.
2. Apply waterproof gear specific wash and gently work into fabric with sponge.
3. Rinse gear thoroughly.
4. Hang it up to dry.
5. Triple check that your gear is completely dry before storage or use.
*Do not dry clean or machine-wash. Detergents and dry cleaning solvents will damage the fabric and ruin waterproofing.
*Never use hot water, bleach, liquid detergents, or dishwashing liquids.
*Allow to dry COMPLETELY before storage or use.
*Avoid prolonged direct sunlight as UV exposure can compromise waterproofing.
Seam Sealing:
Big Agnes tents are seam sealed as part of our manufacturing process! This seam tape alone is durable enough to prevent water leakage. Any seams that have been taped do not need to be seam sealed with a liquid sealer unless you want extra protection. Make sure the seam-sealer is completely dry before re-packing your tent. Damage caused by misapplication may void warranty.
Zippers:
Keeping your zippers clean will help keep the coils and sliders from wearing out. If filled with dirt, vacuum or brush zippers before storing tent. We recommend Gear Aid Zipper Cleaner and Lubricant.
Repairs and Warranty:
All Big Agnes tents are guaranteed against manufacturing or material defect. We do not warranty products damaged from normal wear and tear, alteration made by owner, misuse, accidents or damages caused by uses other than intended. Damage due to misuse, normal wear and tear, or improper care may be repaired, at the discretion of Big Agnes, at a reasonable charge. Tents returned for repair must be clean and free of debris.
Questions? Call us or open a support case:
877.554.8975 | support.bigagnes.com
Setup
TIGER WALL UL SOLUTION DYE SET UP INSTRUCTIONS:
1. Remove contents from stuff sack. Spread out the tent body.
2. Assemble the pole. To ensure each pole section is fully seated, insert each pole section into the next by hand instead of allowing the shock cord to snap them together.
3. Position the assembled pole on top of the tent body. Match the colors of the pole ends with the matching colors of the webbing on the tent body.
4. Insert the pole tips into the grommets at the head and foot of the tent body.
5. Attach the plastic clips on the tent body to the main pole.
6. Clip the ends of the crossover pole into the clear plastic “Ball Cap” connectors that are located on either side of the tent body.
7. Stake out the two cord loops at the head of the tent and the three loops at the foot end.
8. Drape the rainfly over the tent body and match the colors of the webbing on the fly with the webbing on the body.
9. Insert the tips of the crossover pole into the small pockets located on the underside of the rainfly.
10. Attach all Velcro® tabs on the underside of the rainfly to the corresponding pole sections for best stability.
11. Make sure the webbing at the corners of the rainfly is completely slackened. Attach the buckles on the rainfly to those on the tent body.
12. Tighten the webbing on each buckle as needed to keep the rainfly taut.
13. Stake out the one vestibule (UL1) or both vestibules (UL2 & UL3), then stake out all remaining guylines.
14. Low Vent Set Up: For increased ventilation, hook the cord located at the bottom of the vestibule door to the toggle at the top of the zipper located on the underside of the fly.
Separate 6” length pole segment included for emergency field repair. Slide repair pole over the break to act as a splint. Secure splint in place with tape.
FAST FLY SET UP INSTRUCTIONS
If you purchase the optional Big Agnes footprint for your tent, it will enable you to pitch a Fast Fly shelter while leaving the tent body behind. The Fast Fly configuration requires the footprint, tent fly, poles and stakes.
1. Lay the footprint on the ground and stake out the five cord loops.
2. Assemble the pole. To ensure each pole section is fully seated, insert each pole section into the next by hand instead of allowing the shock cord to snap them together.
3. Position the assembled pole on top of the footprint. Match the colors of the pole ends with the matching colors of the webbing on the footprint.
4. Insert the pole tips into the grommets at the head and foot of the footprint.
5. Drape the rainfly over the pole frame. Match the webbing colors on the fly with the matching colors of the webbing on the footprint.
6. Insert the tips of the crossover pole into the small pockets located on the underside of the fly.
7. Attach all Velcro® tabs on the underside of the fly to the corresponding pole sections for best stability.
8. Make sure the webbing at the corners of the rainfly is completely slackened. Attach the buckles on the fly to those on the footprint.
9. Tighten the webbing on each buckle as needed to keep the rainfly taut.
10. Stake out the one vestibule (UL1) or both vestibules (UL2 & UL3), then stake out all remaining guylines.
HELPFUL HINTS FOR TENT SET UP
Our tents are easy to set up, but we suggest you practice once at home before using them for the first time to avoid late night bickering with tent mates while fumbling around in the dark.
Before pitching tent, clear campsite of debris that may pierce tent floor.
We recommend staking out all corners, vestibules and guylines to increase space and ventilation. Securely staking out your tent and all guylines is crucial to maintaining the structural integrity of your tent.
Hang onto your stuff sacks or they’ll blow away and create backcountry litter.
Pull on the pole sleeve fabric when inserting poles to avoid any bunching in the material.
Push rather than pull poles through pole sleeves.
Thanks for choosing a Big Agnes tent!
Please feel free to contact us if you have any questions or comments.
support.bigagnes.com | 877.554.8975
Download Setup Instructions
English (EUR) | EN 
