Features
Diseñado con construcción y materiales de nivel de expedición para soportar las condiciones más duras, basado en las características que conoce de nuestra galardonada y más vendida serie de tiendas de campaña Copper Spur HV UL.
Mayor resistencia y volumen interior utilizable con un diseño de cubo de gran volumen de cuatro direcciones que utiliza postes de gran diámetro para soportar vientos de montaña y cargas de nieve.
Dos puertas en un cuerpo de tienda de campaña de nailon totalmente transpirable, con ventanas con dos opciones de cierre: malla solo para ventilación o cierre con cremallera la capa de nailon para un cierre completo.
Mayor resistencia al desgarro en la bragueta en un 20-25 % con respecto a las telas ripstop estándar de nailon o poliéster; el color se logra mediante un proceso de pigmentación único en el poliuretano, que resiste la decoloración y aumenta la resistencia a los rayos UV; extendiendo la longevidad de la tela cuando se usa en condiciones de gran altitud
Puerta de cierre suave con doble cremallera y diseño de costura discreta para facilitar la entrada; use solo una cremallera para un acceso rápido con tiradores de cremallera de fácil agarre con hebillas y botones aptos para guantes
Guarde fácilmente las puertas abiertas con el seguro de puerta Quick Stash, ubicado en la puerta del cuerpo de la tienda.
La ventilación a través de una gran ventana del techo que se puede cerrar también se puede utilizar como espacio de almacenamiento, y una ventilación para aumentar el flujo de aire y reducir la condensación.
Fly proporciona un flujo de aire maximizado con la función Low Vent en las puertas del vestíbulo y al mismo tiempo proporciona cobertura del vestíbulo.
Guarde los teléfonos u otros dispositivos en los bolsillos para dispositivos multimedia ubicados encima del área para dormir y en múltiples bucles interiores con compartimentos para equipo o para conectar otros accesorios.
Listo para lanzar con tensores y tensores de Dyneema dobles, ecualizados y precortados unidos a la mosca para mayor estabilidad y resistencia en vientos fuertes, además de lengüetas de velcro que conectan la mosca a la estructura del poste proporcionando un lanzamiento perfecto y aún más estabilidad.
Visibilidad mejorada por la noche con vientos reflectantes y correas reflectantes, mientras que los bucles interiores brindan más estabilidad en condiciones de viento extremo.
Incluye estacas para tienda Dirt Dagger UL más ligeras pero más resistentes con construcción de aluminio patentada I-Beam.
Para prolongar la vida útil del piso de su tienda, recomendamos utilizar una base Big Agnes, que se vende por separado.
Specs
Materials
Fly es un ripstop de poliéster sin teñir Dominico® fabricado con hilos de alta tenacidad que aumentan la resistencia al desgarro en un 20-25 % en comparación con los tejidos ripstop estándar de nailon o poliéster. También proporciona alta resistencia a los rayos UV y estabilidad durante las fluctuaciones de temperatura y humedad, lo que permite una tienda de campaña sólida y estable.
Fly está tratado con silicona con un revestimiento de poliuretano impermeable de 1200 mm más un revestimiento adicional en la cara de la tela para aumentar la resistencia al desgarro y a los rayos UV.
El suelo es de tafetán de nailon con un revestimiento de poliuretano impermeable de 10.000 mm.
El cuerpo de la tienda es de nailon antidesgarro, transpirable y malla de poliéster.
El material utiliza un proceso de coloración de pigmento único que resiste la decoloración y aumenta la resistencia a los rayos UV; extendiendo la longevidad de la tela cuando se usa en condiciones de gran altitud.
Todas las costuras selladas con cinta de poliuretano impermeable y sin disolventes (sin PVC ni COV)
Sistema de postes DAC Featherlite NSL, clips de plástico ultraligeros sujetan el cuerpo de la tienda al marco del poste
10 bolsillos interiores de malla, 2 bolsillos multimedia
Bucles de replanteo reforzados y de gran tamaño: para usar con esquís, piolets, bastones de esquí, etc.
Se adapta a los lofts de engranajes Triangle, Trapezoid, Large Trapezoid, Wall y Large Wall (se venden por separado)
Huella: se vende por separado
Incluye 10 estacas para tienda de campaña Big Agnes Dirt Dagger™ UL de 7,5"
Configuración de vuelo rápido disponible
Reviews
We verify some of the reviews and where we do, we label it accordingly. Find more information here.
Care
Tent and Footprint Cleaning and Care Instructions:
Storage:
Always make sure your tent is dry and free of debris before storing. Fold and roll your tent a different way each time to avoid permanent creases. Store in a cool, dry place. Never leave your tent in hot temperatures (such as a car trunk or attic space) for long periods of time, as it will damage the material coatings. Storing your tent damp can result in mildew growth, which may cause your tent to smell, leak, or delaminate. Mildew damage is not covered under warranty.
Cleaning:
For light cleaning, sponge the product with warm water (not hot).
For more thorough cleaning you will need:
-Wash basin (or bath tub)-Warm water (not hot)
-Waterproof Gear Cleaner (we recommend products like Nikwax Tech Wash)
-Sponge
1. Submerge your gear in warm, clean water. Gently agitate with hands. Empty dirty water. Repeat until most of the excess dirt/grime is removed and water is mostly clear.
2. Apply waterproof gear specific wash and gently work into fabric with sponge.
3. Rinse gear thoroughly.
4. Hang it up to dry.
5. Triple check that your gear is completely dry before storage or use.
*Do not dry clean or machine-wash. Detergents and dry cleaning solvents will damage the fabric and ruin waterproofing.
*Never use hot water, bleach, liquid detergents, or dishwashing liquids.
*Allow to dry COMPLETELY before storage or use.
*Avoid prolonged direct sunlight as UV exposure can compromise waterproofing.
Seam Sealing:
Big Agnes tents are seam sealed as part of our manufacturing process! This seam tape alone is durable enough to prevent water leakage. Any seams that have been taped do not need to be seam sealed with a liquid sealer unless you want extra protection. Make sure the seam-sealer is completely dry before re-packing your tent. Damage caused by misapplication may void warranty.
Zippers:
Keeping your zippers clean will help keep the coils and sliders from wearing out. If filled with dirt, vacuum or brush zippers before storing tent. We recommend Gear Aid Zipper Cleaner and Lubricant.
Repairs and Warranty:
All Big Agnes tents are guaranteed against manufacturing or material defect. We do not warranty products damaged from normal wear and tear, alteration made by owner, misuse, accidents or damages caused by uses other than intended. Damage due to misuse, normal wear and tear, or improper care may be repaired, at the discretion of Big Agnes, at a reasonable charge. Tents returned for repair must be clean and free of debris.
Questions? Call us or open a support case:
877.554.8975 | support.bigagnes.com
Setup
COPPER SPUR HV EXPEDITION SET UP INSTRUCTIONS:
1. Remove contents from stuff sack. Spread out the tent body.
2. Stake out the four corners of the tent body.
3. Assemble the two poles: One main pole with one 4-way hub and one short straight cross-over pole. To ensure each pole section is fully seated, insert each pole section into the next by hand instead of allowing the shock cord to snap them together.
4. Position the assembled main pole on top of the tent body. Match the colors of the pole ends with the matching colors of the webbing on the tent body.
5. Insert the pole tips into the grommets at the four corners of the tent.
6. Attach the corresponding plastic clips on the tent body to the main pole.
7. Place the crossover pole across the top of the main pole, and clip the ends of the crossover pole into the clear plastic “Ball Cap” clips that are located above the doors of the tent body. Attach the center plastic clip on the tent body to the crossover pole.
8. Drape the rainfly over the tent body and match the colors of the webbing on the fly with the webbing on the body.
9. Insert the tips of the crossover pole into the small pockets located on the underside of the fly.
10. Attach all Velcro® tabs on the underside of the fly to the corresponding pole sections for best stability.
11. Make sure the webbing at the corners of the rainfly is completely slackened. Attach the buckles on the rainfly to those on the tent body.
12. Tighten the webbing on each buckle as needed to keep the rainfly taut.
13. Stake out the vestibules then stake out all remaining guylines.
14. For increased ventilation, hook the bottom of the vestibule door to the toggle at the top of the zipper.
* Self equalizing Dyneema guylines allow for optimal pitch and durability
Separate 6” length pole segment included for emergency field repair. Slide repair pole over the break to act as a splint. Secure splint in place with tape.
FAST FLY SET UP INSTRUCTIONS:
If you purchase the optional Big Agnes footprint for your tent, it will enable you to pitch a Fast Fly shelter while leaving the tent body behind. The Fast Fly configuration requires the footprint, tent fly, poles and stakes.
1. Lay the footprint on the ground and stake out.
2. Assemble the two poles: One main pole with one 4-way hub and one short straight cross-over pole. To ensure each pole section is fully seated, insert each pole section into the next by hand instead of allowing the shock cord to snap them together.
3. Position the assembled main pole on top of the footprint. Match the colors of the pole ends with the matching colors of the webbing on the footprint.
4. Insert the pole tips into the grommets at the four corners of the foot print.
5. Insert the tips of the crossover pole into the small pockets located on the underside of the fly.
6. With the crossover pole now attached to the fly, drape the rainfly over the pole frame.
7. Match the webbing colors on the fly with the matching colors of the webbing on the footprint.
8. Attach all Velcro® tabs on the underside of the fly to the corresponding pole sections for best stability.
9. Make sure the webbing at the corners of the rainfly is completely slackened. Attach the buckles on the fly to those on the footprint.
10. Tighten the webbing on each buckle as needed to keep the rainfly taut.
11. Stake out the vestibule then stake out all remaining guylines.
HELPFUL HINTS FOR TENT SET UP
Our tents are easy to set up, but we suggest you practice once at home before using them for the first time to avoid late night bickering with tent mates while fumbling around in the dark.
Before pitching tent, clear campsite of debris that may pierce tent floor.
We recommend staking out all corners, vestibules and guylines to increase space and ventilation. Securely staking out your tent and all guylines is crucial to maintaining the structural integrity of your tent.
Hang onto your stuff sacks or they’ll blow away and create backcountry litter.
Pull on the pole sleeve fabric when inserting poles to avoid any bunching in the material.
Push rather than pull poles through pole sleeves.
Thanks for choosing a Big Agnes tent!
Please feel free to contact us if you have any questions or comments.
support.bigagnes.com | 877.554.8975
Download Setup Instructions
English (EUR) | EN 
