Features
Progettato con struttura e materiali a livello di spedizione per gestire le condizioni più difficili, in base alle caratteristiche che conosci dalla nostra serie di tende Copper Spur HV UL più venduta e pluripremiata
Maggiore resistenza e volume interno utilizzabile con design del mozzo ad alto volume a quattro vie che utilizza pali di grande diametro per gestire i venti di montagna e il carico di neve
Due porte sul corpo della tenda in nylon completamente traspirante, dotate di finestre con due opzioni di chiusura: solo rete per la ventilazione o cerniera sullo strato di nylon per una chiusura completa
Maggiore resistenza allo strappo al volo del 20-25% rispetto ai tessuti standard in nylon o poliestere ripstop, il colore è ottenuto utilizzando un processo di pigmentazione unico nel poliuretano, che resiste allo sbiadimento e aumenta la resistenza ai raggi UV; estendendo la longevità del tessuto quando utilizzato in condizioni di alta quota
Chiusura regolare, porta a doppia cerniera con design discreto delle cuciture per facilitare l'ingresso, utilizzare solo una cerniera per un accesso rapido grazie ai tiretti della cerniera di facile presa con levette e fibbie adatte ai guanti
Riponi facilmente le porte aperte con la cerniera grazie al fermaporta Quick Stash, situato sulla porta del corpo della tenda
Ventilazione attraverso un'ampia finestra sul soffitto richiudibile che può essere utilizzata anche come spazio di stoccaggio e una ventola per un maggiore flusso d'aria e una ridotta formazione di condensa
Fly fornisce il flusso d'aria massimizzato con la funzione Low Vent sulle porte del vestibolo pur fornendo la copertura del vestibolo
Riponi telefoni o altri dispositivi nelle tasche multimediali situate sopra l'uso della zona notte e nei molteplici anelli interni con loft per gli attrezzi o per attaccare altri accessori
Pronto per il montaggio con doppi tiranti in Dyneema pretagliati, equalizzati e tenditori fissati al mosca per una maggiore stabilità e resistenza in caso di vento forte, oltre a linguette in Velcro che collegano la mosca alla struttura del palo fornendo un passo perfetto e una stabilità ancora maggiore
Visibilità migliorata di notte grazie ai tiranti riflettenti e alle cinghie riflettenti, mentre i tiranti interni forniscono maggiore stabilità in condizioni estremamente ventose
Include picchetti per tenda Dirt Dagger UL più leggeri ma resistenti con struttura brevettata in alluminio I-Beam
Per prolungare la vita del pavimento della tua tenda ti consigliamo di utilizzare un'impronta Big Agnes, venduta separatamente
Specs
Materials
Fly è Dominico® poliestere ripstop non tinto realizzato con filati ad alta tenacità che aumentano la resistenza allo strappo del 20-25% rispetto ai tessuti standard in nylon o poliestere ripstop. Fornisce inoltre un'elevata resistenza ai raggi UV e stabilità durante le fluttuazioni di temperatura e umidità, consentendo una tenda a piantana solida e stabile
La mosca è trattata con silicone con rivestimento in poliuretano impermeabile da 1200 mm più un rivestimento aggiuntivo sulla parte anteriore del tessuto per aumentare la resistenza allo strappo e ai raggi UV
Il pavimento è in taffetà di nylon con rivestimento in poliuretano impermeabile da 10.000 mm
Il corpo della tenda è in nylon ripstop traspirante e rete di poliestere
Il materiale utilizza un esclusivo processo di colorazione con pigmenti che resiste allo sbiadimento e aumenta la resistenza ai raggi UV; estendendo la longevità del tessuto quando utilizzato in condizioni di alta quota.
Tutte le cuciture sono nastrate con nastro in poliuretano impermeabile e privo di solventi (senza PVC o COV)
Sistema di pali DAC Featherlite NSL, clip in plastica ultraleggere fissano il corpo della tenda al telaio dei pali
10 tasche interne in rete, 2 tasche multimediali
Anelli di tracciamento sovradimensionati e rinforzati - da utilizzare con sci, piccozza, bastoncini da sci, ecc.
Adatto ai loft per attrezzi a triangolo, trapezio, trapezio grande, parete e parete grande, venduti separatamente
Impronta: venduta separatamente
Include 10 picchetti per tenda UL Big Agnes Dirt Dagger ™ da 7,5"
Configurazione Fast Fly disponibile
Reviews
We verify some of the reviews and where we do, we label it accordingly. Find more information here.
Care
Tent and Footprint Cleaning and Care Instructions:
Storage:
Always make sure your tent is dry and free of debris before storing. Fold and roll your tent a different way each time to avoid permanent creases. Store in a cool, dry place. Never leave your tent in hot temperatures (such as a car trunk or attic space) for long periods of time, as it will damage the material coatings. Storing your tent damp can result in mildew growth, which may cause your tent to smell, leak, or delaminate. Mildew damage is not covered under warranty.
Cleaning:
For light cleaning, sponge the product with warm water (not hot).
For more thorough cleaning you will need:
-Wash basin (or bath tub)-Warm water (not hot)
-Waterproof Gear Cleaner (we recommend products like Nikwax Tech Wash)
-Sponge
1. Submerge your gear in warm, clean water. Gently agitate with hands. Empty dirty water. Repeat until most of the excess dirt/grime is removed and water is mostly clear.
2. Apply waterproof gear specific wash and gently work into fabric with sponge.
3. Rinse gear thoroughly.
4. Hang it up to dry.
5. Triple check that your gear is completely dry before storage or use.
*Do not dry clean or machine-wash. Detergents and dry cleaning solvents will damage the fabric and ruin waterproofing.
*Never use hot water, bleach, liquid detergents, or dishwashing liquids.
*Allow to dry COMPLETELY before storage or use.
*Avoid prolonged direct sunlight as UV exposure can compromise waterproofing.
Seam Sealing:
Big Agnes tents are seam sealed as part of our manufacturing process! This seam tape alone is durable enough to prevent water leakage. Any seams that have been taped do not need to be seam sealed with a liquid sealer unless you want extra protection. Make sure the seam-sealer is completely dry before re-packing your tent. Damage caused by misapplication may void warranty.
Zippers:
Keeping your zippers clean will help keep the coils and sliders from wearing out. If filled with dirt, vacuum or brush zippers before storing tent. We recommend Gear Aid Zipper Cleaner and Lubricant.
Repairs and Warranty:
All Big Agnes tents are guaranteed against manufacturing or material defect. We do not warranty products damaged from normal wear and tear, alteration made by owner, misuse, accidents or damages caused by uses other than intended. Damage due to misuse, normal wear and tear, or improper care may be repaired, at the discretion of Big Agnes, at a reasonable charge. Tents returned for repair must be clean and free of debris.
Questions? Call us or open a support case:
877.554.8975 | support.bigagnes.com
Setup
COPPER SPUR HV EXPEDITION SET UP INSTRUCTIONS:
1. Remove contents from stuff sack. Spread out the tent body.
2. Stake out the four corners of the tent body.
3. Assemble the two poles: One main pole with one 4-way hub and one short straight cross-over pole. To ensure each pole section is fully seated, insert each pole section into the next by hand instead of allowing the shock cord to snap them together.
4. Position the assembled main pole on top of the tent body. Match the colors of the pole ends with the matching colors of the webbing on the tent body.
5. Insert the pole tips into the grommets at the four corners of the tent.
6. Attach the corresponding plastic clips on the tent body to the main pole.
7. Place the crossover pole across the top of the main pole, and clip the ends of the crossover pole into the clear plastic “Ball Cap” clips that are located above the doors of the tent body. Attach the center plastic clip on the tent body to the crossover pole.
8. Drape the rainfly over the tent body and match the colors of the webbing on the fly with the webbing on the body.
9. Insert the tips of the crossover pole into the small pockets located on the underside of the fly.
10. Attach all Velcro® tabs on the underside of the fly to the corresponding pole sections for best stability.
11. Make sure the webbing at the corners of the rainfly is completely slackened. Attach the buckles on the rainfly to those on the tent body.
12. Tighten the webbing on each buckle as needed to keep the rainfly taut.
13. Stake out the vestibules then stake out all remaining guylines.
14. For increased ventilation, hook the bottom of the vestibule door to the toggle at the top of the zipper.
* Self equalizing Dyneema guylines allow for optimal pitch and durability
Separate 6” length pole segment included for emergency field repair. Slide repair pole over the break to act as a splint. Secure splint in place with tape.
FAST FLY SET UP INSTRUCTIONS:
If you purchase the optional Big Agnes footprint for your tent, it will enable you to pitch a Fast Fly shelter while leaving the tent body behind. The Fast Fly configuration requires the footprint, tent fly, poles and stakes.
1. Lay the footprint on the ground and stake out.
2. Assemble the two poles: One main pole with one 4-way hub and one short straight cross-over pole. To ensure each pole section is fully seated, insert each pole section into the next by hand instead of allowing the shock cord to snap them together.
3. Position the assembled main pole on top of the footprint. Match the colors of the pole ends with the matching colors of the webbing on the footprint.
4. Insert the pole tips into the grommets at the four corners of the foot print.
5. Insert the tips of the crossover pole into the small pockets located on the underside of the fly.
6. With the crossover pole now attached to the fly, drape the rainfly over the pole frame.
7. Match the webbing colors on the fly with the matching colors of the webbing on the footprint.
8. Attach all Velcro® tabs on the underside of the fly to the corresponding pole sections for best stability.
9. Make sure the webbing at the corners of the rainfly is completely slackened. Attach the buckles on the fly to those on the footprint.
10. Tighten the webbing on each buckle as needed to keep the rainfly taut.
11. Stake out the vestibule then stake out all remaining guylines.
HELPFUL HINTS FOR TENT SET UP
Our tents are easy to set up, but we suggest you practice once at home before using them for the first time to avoid late night bickering with tent mates while fumbling around in the dark.
Before pitching tent, clear campsite of debris that may pierce tent floor.
We recommend staking out all corners, vestibules and guylines to increase space and ventilation. Securely staking out your tent and all guylines is crucial to maintaining the structural integrity of your tent.
Hang onto your stuff sacks or they’ll blow away and create backcountry litter.
Pull on the pole sleeve fabric when inserting poles to avoid any bunching in the material.
Push rather than pull poles through pole sleeves.
Thanks for choosing a Big Agnes tent!
Please feel free to contact us if you have any questions or comments.
support.bigagnes.com | 877.554.8975
Download Setup Instructions
English (EUR) | EN 
