Caratteristiche
Spazio abitativo ampliato con due porte e due vestiboli in stile tenda da sole, ideali per proteggersi dal sole e dalla pioggia (l'UL1 è dotato di una porta e un vestibolo)
Il tessuto proprietario ultraleggero in nylon doppio ripstop misto denari offre una maggiore resistenza agli strappi e alle forature senza aumentare il peso.
I pali DAC con design a 4 vie e mozzo ad alto volume offrono resistenza, stabilità e un ampio spazio vivibile
Facile ingresso attraverso la porta a doppia cerniera con tiretti di facile impugnatura
Facile stivaggio delle porte non chiuse con il portaoggetti Quick Stash, situato sulla porta del corpo tenda
Ampie possibilità di stivaggio grazie alle tasche sul soffitto in testa, al contenitore 3-D ai piedi e alle tasche per i media sopra la zona notte.
Le caratteristiche di ventilazione bassa sulle porte dell'anticamera e la ventilazione alta della tenda creano un flusso d'aria che riduce la condensa in tutte le condizioni atmosferiche.
La struttura proprietaria dell'angolo della tenda con l'esclusiva TipLok™ Tent Buckle™ semplifica l'installazione della tenda combinando tre funzioni: fissaggio sicuro della punta del palo, aggancio e tensionamento del parapioggia e occhiello per il picchettamento.
Pronta per il montaggio, con funi metalliche e tenditori pretagliati attaccati al telo.
Le linguette con gancio e occhiello collegano il volantino alla struttura del palo, garantendo un'apertura perfetta e una maggiore stabilità.
Maggiore visibilità notturna grazie ai tiranti e alle fettucce riflettenti
Durevole tecnologia mtnGLO® Tent Light, le luci a LED forniscono l'illuminazione necessaria per sistemare gli attrezzi, giocare a carte e stare con gli amici senza bisogno di una lampada frontale o una lanterna accecante.
Controllo delle impostazioni della luce tramite il semplice pulsante di comando con tre opzioni: accensione, spegnimento e luminosità al 50%.
Richiede tre batterie AAA (non incluse) per il funzionamento del controller mtnGLO®.
Specifiche
I materiali
L'ala e il pavimento sono in nylon proprietario ultraleggero doppio ripstop misto denari trattato con silicone, con griglia ripstop tinta in massa e rivestimento in poliuretano impermeabile da 1200 mm.
Il corpo della tenda è in nylon proprietario ultraleggero a doppio ripstop misto denari, con griglia ripstop tinta in massa e rete in poliestere.
Cuciture nastrate in poliuretano impermeabile e senza solventi (senza PVC o VOC)
Sistemi di aste DAC Featherlite NFL, Featherlite NSL e Pressfit
Compatibile con i soppalchi per attrezzatura Large Trapezoid, Wall, Large Wall, Square e Triangle, venduti separatamente
Include 8 picchetti da 6" Big Agnes Dirt Dagger™ UL per tende e 2 linee di ancoraggio extra per tende da sole.
Compatibile con le impronte Copper Spur UL dotate di fibbie per tende TipLok™.
Possibilità di installazione rapida del moschettone se utilizzato con un'impronta compatibile
Recensioni
Verifichiamo alcune delle recensioni e, in caso di verifica, le etichettiamo di conseguenza. Maggiori informazioni qui.
Cura
Istruzioni per la pulizia e la cura della tenda e dell'impronta:
Conservazione:
Assicurarsi sempre che la tenda sia asciutta e priva di detriti prima di riporla. Piegare e arrotolare la tenda ogni volta in modo diverso per evitare pieghe permanenti. Conservare in un luogo fresco e asciutto. Non lasciare mai la tenda a temperature elevate (ad esempio nel bagagliaio dell'auto o in soffitta) per lunghi periodi di tempo, in quanto ciò danneggia i rivestimenti del materiale. La conservazione della tenda in un luogo umido può provocare la formazione di muffa, che può causare odore, perdite o delaminazione della tenda. I danni da muffa non sono coperti dalla garanzia.
Pulizia:
Per una pulizia leggera, passare una spugna con acqua calda (non bollente).
Per una pulizia più accurata sono necessari:
-lavandino (o vasca da bagno) -acqua calda (non bollente)
-detergente per ingranaggi impermeabile (consigliamo prodotti come Nikwax Tech Wash)
-Spugna
1. Immergere l'attrezzatura in acqua calda e pulita. Agitare delicatamente con le mani. Svuotare l'acqua sporca. Ripetere l'operazione fino a quando la maggior parte dello sporco e della sporcizia in eccesso è stata rimossa e l'acqua è per lo più limpida.
2. Applicare il lavaggio specifico per l'attrezzatura impermeabile e lavorare delicatamente sul tessuto con una spugna.
3. Risciacquare accuratamente l'attrezzatura.
4. Appendere ad asciugare.
5. Controllare tre volte che l'attrezzatura sia completamente asciutta prima di riporla o utilizzarla.
*Non lavare a secco o in lavatrice. I detergenti e i solventi per il lavaggio a secco danneggiano il tessuto e rovinano l'impermeabilità.
*Non utilizzare mai acqua calda, candeggina, detergenti liquidi o detersivi per piatti.
*Lasciare asciugare COMPLETAMENTE prima di riporlo o utilizzarlo.
*Evitare l'esposizione prolungata alla luce solare diretta, poiché l'esposizione ai raggi UV può compromettere l'impermeabilità.
Sigillatura delle cuciture:
Le tende Big Agnes sono sigillate con cuciture come parte del nostro processo di produzione! Il nastro di cucitura è sufficientemente resistente da impedire la fuoriuscita di acqua. Le cuciture che sono state nastrate non devono essere sigillate con un sigillante liquido, a meno che non si desideri una protezione aggiuntiva. Assicurarsi che il sigillante per cuciture sia completamente asciutto prima di imballare nuovamente la tenda. I danni causati da un'applicazione errata possono invalidare la garanzia.
Cerniere:
Mantenere pulite le cerniere aiuta a evitare che le bobine e i cursori si usurino. Se sono piene di sporcizia, aspirare o spazzolare le cerniere prima di riporre la tenda. Si consiglia il detergente e lubrificante per cerniere Gear Aid.
Riparazioni e garanzia:
Tutte le tende Big Agnes sono garantite contro i difetti di fabbricazione o di materiale. Non garantiamo i prodotti danneggiati da normale usura, modifiche apportate dal proprietario, uso improprio, incidenti o danni causati da usi diversi da quelli previsti. I danni dovuti a uso improprio, normale usura o cura impropria possono essere riparati, a discrezione di Big Agnes, con un costo ragionevole. Le tende restituite per la riparazione devono essere pulite e prive di detriti.
Domande? Chiamateci o aprite un caso di assistenza:
877.554.8975 | support.bigagnes.com
Impostazione
COPPER SPUR HV UL & HV UL mtnGLO® SET UP INSTRUCTIONS:
1. Remove contents from stuff sack. Spread out the tent body.
2. Stake out the four corners of the tent body.
3. UL2, 3, 4 & 5 assemble the two poles: One main pole with a 4-way hub and one short straight crossover pole. UL1 assemble one main pole with two hubs and an attached crossover pole. To ensure each pole section is fully seated insert each pole section into the next by hand, instead of allowing the shock cord to snap them together.
4. Position the assembled main pole on top of the tent body. Match the colors of the pole ends with the matching colors of the webbing on the tent body.
5. Insert the pole tips into the grommets at the four corners of the tent.
6. Attach the plastic clips on the tent body to the main pole.
7. UL2, 3, 4 & 5 place the crossover pole across the top of the main pole. The crossover pole on UL1 is already attached to the main pole.
8. Clip the ends of the crossover pole into the clear plastic “Ball Cap” clips that are located above the doors of the tent body. UL2 & 3 attached the center plastic clip on the tent body to the crossover pole.
9. Drape the rainfly over the tent body and match the colors of the webbing on the fly with the webbing on the body.
10. Insert the tips of the crossover pole into the small pockets located on the underside of the fly.
11. Attach all Velcro® tabs on the underside of the fly to the corresponding pole sections for best stability.
12. Make sure the webbing at the corners of the rainfly is completely slackened. Attach the buckles on the rainfly to those on the tent body.
13. Tighten the webbing on each buckle as needed to keep the rainfly taut.
14. Stake out the vestibules then stake out all remaining guylines.
15. Low Vent Set Up: For increased ventilation, hook the cord located at the bottom of the vestibule door to the toggle at the top of the zipper located on the underside of the fly.
16. Awning Set Up: Unzip the two zippers at the head-end of the tent, attach extra guylines (included in stake bag) to corner cord loops, adjust trekking poles to desired height, insert trekking pole tips through grosgrain loop or cord loop on corners of panel. Stake out guylines.
Separate 6” length pole segment included for emergency field repair. Slide repair pole over the break to act as a splint. Secure splint in place with tape.
FAST FLY SET UP INSTRUCTIONS:
If you purchase the optional Big Agnes footprint for your tent, it will enable you to pitch a Fast Fly shelter while leaving the tent body behind. The Fast Fly configuration requires the footprint, tent fly, poles and stakes.
1. Lay the footprint on the ground and stake out.
2. UL2, 3, 4 & 5 assemble the two poles: One main pole with a 4-way hub and one short straight crossover pole. UL1 assemble one main pole with two hubs the crossover pole is attached to the main pole. To ensure each pole section is fully seated insert each pole section into the next by hand, instead of allowing the shock cord to snap them together.
3. Position the assembled main pole on top of the footprint. Match the colors of the pole ends with the matching colors of the webbing on the footprint.
4. Insert the pole tips into the grommets at the four corners of the footprint.
5. UL2, 3, 4 & 5 insert the tips of the crossover pole into the small pockets located on the underside of the fly.
6. UL2, 3, 4 & 5 with the crossover pole now attached to the fly drape the rainfly over the pole frame. UL1 drape the rainfly over the pole frame, then insert the tips of the crossover pole into the small pockets located on the underside of the fly.
7. Match the webbing colors on the fly with the matching colors of the webbing on the footprint.
8. Attach all Velcro® tabs on the underside of the fly to the corresponding pole sections for best stability.
9. Make sure the webbing at the corners of the rainfly is completely slackened. Attach the buckles on the fly to those on the footprint.
10. Tighten the webbing on each buckle as needed to keep the rainfly taut. 11. Stake out the vestibules then stake out all remaining guylines.
12. Low Vent Set Up: For increased ventilation, hook the cord located at the bottom of the vestibule door to the toggle at the top of the zipper located on the underside of the fly.
13. Awning Set Up: Unzip the two zippers at the head-end of the tent, attach extra guylines (included in stake bag) to corner cord loops, adjust trekking poles to desired height, insert trekking pole tips through grosgrain loop or cord loop on corners of panel. Stake out guylines.
HELPFUL HINTS FOR TENT SET UP
Our tents are easy to set up, but we suggest you practice once at home before using them for the first time to avoid late night bickering with tent mates while fumbling around in the dark.
Before pitching tent, clear campsite of debris that may pierce tent floor.
We recommend staking out all corners, vestibules and guylines to increase space and ventilation. Securely staking out your tent and all guylines is crucial to maintaining the structural integrity of your tent.
Hang onto your stuff sacks or they’ll blow away and create backcountry litter.
Pull on the pole sleeve fabric when inserting poles to avoid any bunching in the material.
Push rather than pull poles through pole sleeves.
Thanks for choosing a Big Agnes tent!
Please feel free to contact us if you have any questions or comments.
support.bigagnes.com | 877.554.8975
Scarica le istruzioni per l'installazione