La Tiger Wall UL è l'ideale per i minimalisti che cercano una tenda ultraleggera con ingresso laterale.
Costruito utilizzando tessuto tinto in massa che è altamente resistente allo sbiadimento UV e migliore per l'ambiente e riduce drasticamente il consumo di energia e acqua durante la produzione. L'architettura unipolare che utilizza i materiali DAC Featherlite crea una struttura semplice, ma forte e robusta su cui puoi fare affidamento durante viaggi di più giorni. La Tiger Wall UL semplifica la vita in tenda tenendo conto del risparmio di peso per i contatori per le tue avventure di tre stagioni.
Il tessuto tinto in massa è altamente resistente allo sbiadimento UV e riduce drasticamente il consumo di energia e l'uso di acqua durante la produzione, un processo che è migliore per l'ambiente e migliora la qualità del tessuto della tenda
Presenta una porta, un vestibolo su UL1 e due porte, due vestiboli su UL2 e UL3 con alette antivento su tutte le cerniere del vestibolo
Configurazione semplificata con struttura brevettata dell'angolo della tenda e esclusiva fibbia per tenda TipLok™™ che combina tre funzioni: cattura sicura della punta del palo, fissaggio e tenditore del parapioggia e anello di picchettamento
Installazione e smontaggio facili ed efficienti con la robusta struttura del sistema unipolare DAC Featherlite
Spazio di archiviazione elevato con un "mezzanino" per contenitori 3D e spazio aggiuntivo nel soffitto e tasche sulle porte nella parte superiore
Riponi telefoni o altri dispositivi nelle tasche multimediali situate sopra la zona notte
Mantieni l'interno asciutto grazie alla doppia cerniera, al vestibolo di ingresso/uscita asciutto e a chiusura regolare
Più spazio utilizzabile tra i piedi e la parete della tenda con angoli strutturati all'estremità dei piedi
Flusso d'aria aumentato grazie alla funzione di ventilazione bassa sulle porte del vestibolo e doppi cursori sulle cerniere del vestibolo per la ventilazione dall'alto o dal basso
Pronto per il montaggio con tiranti pretagliati e tenditori fissati al mosca, e stabilità extra con linguette a strappo che collegano la mosca alla struttura del palo
Facile da montare in qualsiasi momento della giornata grazie ai tiranti riflettenti e alla cinghia con codice colore sugli angoli della tenda
Include picchetti per tende Dirt Dagger™ UL più leggeri ma resistenti con struttura in alluminio I-Beam in attesa di brevetto
Per prolungare la vita del pavimento della tua tenda ti consigliamo di utilizzare un'impronta Big Agnes, venduta separatamente
Patta e pavimento: nylon ripstop tinto in massa trattato con silicone con rivestimento in poliuretano impermeabile 1200 mm
Corpo tenda: nylon ripstop tinto in massa traspirante e rete di poliestere
Cuciture nastrate in poliuretano impermeabili e prive di solventi (senza PVC o COV)
Sistema di pali DAC Featherlite NFL e design del palo del mozzo
Loft per attrezzi, venduti separatamente: UL1 adatto a muro, triangolo e quadrato, UL2 adatto a triangolo, trapezio grande e muro, UL3 adatto a triangolo, trapezio, trapezio grande, muro e muro grande
Configurazione Fast Fly disponibile se utilizzato con impronta compatibile
Compatibile con l'impronta Tiger Wall UL dotata di fibbie per tende TipLok™
Include 8 picchetti per tenda UL Big Agnes Dirt Dagger ™ da 6 pollici
Tent and Footprint Cleaning and Care Instructions:
Storage:
Always make sure your tent is dry and free of debris before storing. Fold and roll your tent a different way each time to avoid permanent creases. Store in a cool, dry place. Never leave your tent in hot temperatures (such as a car trunk or attic space) for long periods of time, as it will damage the material coatings. Storing your tent damp can result in mildew growth, which may cause your tent to smell, leak, or delaminate. Mildew damage is not covered under warranty.
Cleaning:
For light cleaning, sponge the product with warm water (not hot).
For more thorough cleaning you will need:
-Wash basin (or bath tub)-Warm water (not hot)
-Waterproof Gear Cleaner (we recommend products like Nikwax Tech Wash)
-Sponge
1. Submerge your gear in warm, clean water. Gently agitate with hands. Empty dirty water. Repeat until most of the excess dirt/grime is removed and water is mostly clear.
2. Apply waterproof gear specific wash and gently work into fabric with sponge.
3. Rinse gear thoroughly.
4. Hang it up to dry.
5. Triple check that your gear is completely dry before storage or use.
*Do not dry clean or machine-wash. Detergents and dry cleaning solvents will damage the fabric and ruin waterproofing.
*Never use hot water, bleach, liquid detergents, or dishwashing liquids.
*Allow to dry COMPLETELY before storage or use.
*Avoid prolonged direct sunlight as UV exposure can compromise waterproofing.
Seam Sealing:
Big Agnes tents are seam sealed as part of our manufacturing process! This seam tape alone is durable enough to prevent water leakage. Any seams that have been taped do not need to be seam sealed with a liquid sealer unless you want extra protection. Make sure the seam-sealer is completely dry before re-packing your tent. Damage caused by misapplication may void warranty.
Zippers:
Keeping your zippers clean will help keep the coils and sliders from wearing out. If filled with dirt, vacuum or brush zippers before storing tent. We recommend Gear Aid Zipper Cleaner and Lubricant.
Repairs and Warranty:
All Big Agnes tents are guaranteed against manufacturing or material defect. We do not warranty products damaged from normal wear and tear, alteration made by owner, misuse, accidents or damages caused by uses other than intended. Damage due to misuse, normal wear and tear, or improper care may be repaired, at the discretion of Big Agnes, at a reasonable charge. Tents returned for repair must be clean and free of debris.
Questions? Call us or open a support case:
877.554.8975 | support.bigagnes.com
1. Remove contents from stuff sack. Spread out the tent body.
2. Assemble the pole. To ensure each pole section is fully seated, insert each pole section into the next by hand instead of allowing the shock cord to snap them together.
3. Position the assembled pole on top of the tent body. Match the colors of the pole ends with the matching colors of the webbing on the tent body.
4. Insert the pole tips into the grommets at the head and foot of the tent body.
5. Attach the plastic clips on the tent body to the main pole.
6. Clip the ends of the crossover pole into the clear plastic “Ball Cap” connectors that are located on either side of the tent body.
7. Stake out the two cord loops at the head of the tent and the three loops at the foot end.
8. Drape the rainfly over the tent body and match the colors of the webbing on the fly with the webbing on the body.
9. Insert the tips of the crossover pole into the small pockets located on the underside of the rainfly.
10. Attach all Velcro® tabs on the underside of the rainfly to the corresponding pole sections for best stability.
11. Make sure the webbing at the corners of the rainfly is completely slackened. Attach the buckles on the rainfly to those on the tent body.
12. Tighten the webbing on each buckle as needed to keep the rainfly taut.
13. Stake out the one vestibule (UL1) or both vestibules (UL2 & UL3), then stake out all remaining guylines.
14. Low Vent Set Up: For increased ventilation, hook the cord located at the bottom of the vestibule door to the toggle at the top of the zipper located on the underside of the fly.
Separate 6” length pole segment included for emergency field repair. Slide repair pole over the break to act as a splint. Secure splint in place with tape.
FAST FLY SET UP INSTRUCTIONS
If you purchase the optional Big Agnes footprint for your tent, it will enable you to pitch a Fast Fly shelter while leaving the tent body behind. The Fast Fly configuration requires the footprint, tent fly, poles and stakes.
1. Lay the footprint on the ground and stake out the five cord loops.
2. Assemble the pole. To ensure each pole section is fully seated, insert each pole section into the next by hand instead of allowing the shock cord to snap them together.
3. Position the assembled pole on top of the footprint. Match the colors of the pole ends with the matching colors of the webbing on the footprint.
4. Insert the pole tips into the grommets at the head and foot of the footprint.
5. Drape the rainfly over the pole frame. Match the webbing colors on the fly with the matching colors of the webbing on the footprint.
6. Insert the tips of the crossover pole into the small pockets located on the underside of the fly.
7. Attach all Velcro® tabs on the underside of the fly to the corresponding pole sections for best stability.
8. Make sure the webbing at the corners of the rainfly is completely slackened. Attach the buckles on the fly to those on the footprint.
9. Tighten the webbing on each buckle as needed to keep the rainfly taut.
10. Stake out the one vestibule (UL1) or both vestibules (UL2 & UL3), then stake out all remaining guylines.
HELPFUL HINTS FOR TENT SET UP
Our tents are easy to set up, but we suggest you practice once at home before using them for the first time to avoid late night bickering with tent mates while fumbling around in the dark.
Before pitching tent, clear campsite of debris that may pierce tent floor.
We recommend staking out all corners, vestibules and guylines to increase space and ventilation. Securely staking out your tent and all guylines is crucial to maintaining the structural integrity of your tent.
Hang onto your stuff sacks or they’ll blow away and create backcountry litter.
Pull on the pole sleeve fabric when inserting poles to avoid any bunching in the material.
Push rather than pull poles through pole sleeves.
Thanks for choosing a Big Agnes tent!
Please feel free to contact us if you have any questions or comments.
support.bigagnes.com | 877.554.8975
Download Setup Instructions
All Big Agnes products include a Limited Warranty against manufacturing or material defect.
Accessibile solo galleggiando sul fiume Yampa, questo capolavoro geologico attraversa il Dinosaur National Monument appena ad ovest di Steamboat Springs, in Colorado. Il Muro della Tigre presenta strisce surreali di vernice nera del deserto nota come Arazzo Navajo. È tradizione che i navigatori bacino il muro come portafortuna prima di navigare lungo le rapide di Warm Springs.
English (EUR) | EN 
