Características
Espacio habitable ampliado con dos puertas y dos vestíbulos de estilo toldo con cremallera doble
Tejido ultraligero de nylon doble ripstop de denier mixto que ofrece mayor resistencia al desgarro y a los pinchazos sin añadir peso.
Los mástiles DAC con diseño de cubo de gran volumen en 4 direcciones proporcionan resistencia, estabilidad y un generoso espacio habitable
Fácil entrada a través de la puerta de doble cremallera con tiradores de cremallera de fácil agarre
Las puertas sin cremallera se guardan fácilmente con el sistema Quick Stash, situado en la puerta de la tienda.
Amplias opciones de almacenamiento con 8 bolsillos interiores de malla y 4 bolsillos multimedia
La ventilación baja de las puertas del vestíbulo junto con la ventilación alta de la bragueta crean un flujo de aire que reduce la condensación en todas las condiciones meteorológicas.
La construcción patentada de las esquinas de la tienda con la exclusiva hebilla TipLok™ Tent Buckle™ agiliza el montaje de la tienda al combinar tres funciones: sujeción segura de la punta del mástil, fijación y tensado del toldo y bucle de estacado.
Lista para montar con tensores y vientos precortados fijados al techo
Las lengüetas de gancho y bucle conectan el techo a la estructura del mástil, proporcionando un montaje perfecto y estabilidad adicional
Mayor visibilidad nocturna gracias a los vientos y correas reflectantes
Sujeta el equipo, los accesorios y las luces mtnGLO® Tent & Camp Lights con múltiples lazos interiores.
Para prolongar la vida útil del suelo de la tienda, se recomienda utilizar una huella Big Agnes, que se vende por separado.
Especificaciones
Materiales
El techo y el suelo son de nailon ultraligero de doble ripstop mixto denier tratado con silicona, con rejilla ripstop teñida en masa y revestimiento de poliuretano impermeable de 1200 mm.
El cuerpo de la tienda es de nailon ultraligero transpirable de doble ripstop mixto denier, con rejilla ripstop teñida en masa y malla de poliéster.
Costuras selladas de poliuretano impermeable sin disolventes (sin PVC ni COV)
Sistemas de mástiles DAC Featherlite NFL, Featherlite NSL y pressfit
Compatible con lofts de engranajes Wall, Large Wall, Trapezoid y Square, que se venden por separado
Incluye 10 estacas Big Agnes Dirt Dagger™ UL de 6" y 2 vientos de toldo adicionales.
Compatible con Copper Spur UL footprints con TipLok™ Tent Buckles
Fast Fly Setup disponible cuando se utiliza con la huella compatible
Reseñas
Verificamos algunas de las reseñas y, cuando lo hacemos, las etiquetamos en consecuencia. Más información aquí.
Atención
Instrucciones de limpieza y cuidado de la tienda y la huella:
Almacenamiento:
Asegúrese siempre de que la tienda está seca y libre de residuos antes de guardarla. Pliegue y enrolle la tienda de forma diferente cada vez para evitar arrugas permanentes. Guárdela en un lugar fresco y seco. No deje nunca la tienda a altas temperaturas (como en el maletero de un coche o en un ático) durante mucho tiempo, ya que se dañarían los revestimientos del material. Almacenar la tienda en un lugar húmedo puede provocar la aparición de moho, que puede hacer que la tienda huela mal, tenga fugas o se deslamine. Los daños causados por el moho no están cubiertos por la garantía.
Limpieza:
Para una limpieza ligera, pase una esponja con agua tibia (no caliente).
Para una limpieza más a fondo necesitará:
-Lavabo (o bañera)-Agua tibia (no caliente)
-Limpiador de engranajes resistente al agua (recomendamos productos como Nikwax Tech Wash)
-Esponja
1. Sumerja su equipo en agua tibia y limpia. Agite suavemente con las manos. Vacíe el agua sucia. Repita la operación hasta que haya eliminado la mayor parte de la suciedad y el agua esté limpia.
2. 2. Aplique el lavado específico para prendas impermeables y aplíquelo suavemente con una esponja.
3. 3. Aclare bien la prenda.
4. Cuélgala para que se seque.
5. Compruebe tres veces que la ropa esté completamente seca antes de guardarla o utilizarla.
*No lavar en seco ni a máquina. Los detergentes y disolventes de limpieza en seco dañarán el tejido y estropearán la impermeabilidad.
*Nunca utilice agua caliente, lejía, detergentes líquidos o líquidos lavavajillas.
*Deje que se seque COMPLETAMENTE antes de guardarlo o utilizarlo.
*Evite la luz solar directa prolongada ya que la exposición a los rayos UV puede comprometer la impermeabilidad.
Sellado de costuras:
Las tiendas Big Agnes están selladas como parte de nuestro proceso de fabricación. Esta cinta de costura por sí sola es lo suficientemente duradera como para evitar fugas de agua. Cualquier costura que haya sido sellada con cinta adhesiva no necesita ser sellada con un sellador líquido a menos que desee una protección extra. Asegúrese de que el sellador de costuras esté completamente seco antes de volver a embalar la tienda. Los daños causados por una aplicación incorrecta pueden anular la garantía.
Cremalleras:
Mantener las cremalleras limpias ayudará a evitar que las espirales y los deslizadores se desgasten. Si están llenas de suciedad, aspire o cepille las cremalleras antes de guardar la tienda. Recomendamos el limpiador y lubricante de cremalleras Gear Aid.
Reparaciones y Garantía:
Todas las tiendas Big Agnes están garantizadas contra defectos de fabricación o materiales. No garantizamos productos dañados por desgaste normal, alteraciones realizadas por el propietario, mal uso, accidentes o daños causados por usos distintos al previsto. Los daños debidos al mal uso, desgaste normal o cuidado inadecuado pueden ser reparados, a discreción de Big Agnes, con un cargo razonable. Las tiendas devueltas para su reparación deben estar limpias y libres de residuos.
¿Tiene preguntas? Llámenos o abra un caso de soporte:
877.554.8975 | support.bigagnes.com
Configurar
COPPER SPUR HV UL & HV UL mtnGLO® SET UP INSTRUCTIONS:
1. Remove contents from stuff sack. Spread out the tent body.
2. Stake out the four corners of the tent body.
3. UL2, 3, 4 & 5 assemble the two poles: One main pole with a 4-way hub and one short straight crossover pole. UL1 assemble one main pole with two hubs and an attached crossover pole. To ensure each pole section is fully seated insert each pole section into the next by hand, instead of allowing the shock cord to snap them together.
4. Position the assembled main pole on top of the tent body. Match the colors of the pole ends with the matching colors of the webbing on the tent body.
5. Insert the pole tips into the grommets at the four corners of the tent.
6. Attach the plastic clips on the tent body to the main pole.
7. UL2, 3, 4 & 5 place the crossover pole across the top of the main pole. The crossover pole on UL1 is already attached to the main pole.
8. Clip the ends of the crossover pole into the clear plastic “Ball Cap” clips that are located above the doors of the tent body. UL2 & 3 attached the center plastic clip on the tent body to the crossover pole.
9. Drape the rainfly over the tent body and match the colors of the webbing on the fly with the webbing on the body.
10. Insert the tips of the crossover pole into the small pockets located on the underside of the fly.
11. Attach all Velcro® tabs on the underside of the fly to the corresponding pole sections for best stability.
12. Make sure the webbing at the corners of the rainfly is completely slackened. Attach the buckles on the rainfly to those on the tent body.
13. Tighten the webbing on each buckle as needed to keep the rainfly taut.
14. Stake out the vestibules then stake out all remaining guylines.
15. Low Vent Set Up: For increased ventilation, hook the cord located at the bottom of the vestibule door to the toggle at the top of the zipper located on the underside of the fly.
16. Awning Set Up: Unzip the two zippers at the head-end of the tent, attach extra guylines (included in stake bag) to corner cord loops, adjust trekking poles to desired height, insert trekking pole tips through grosgrain loop or cord loop on corners of panel. Stake out guylines.
Separate 6” length pole segment included for emergency field repair. Slide repair pole over the break to act as a splint. Secure splint in place with tape.
FAST FLY SET UP INSTRUCTIONS:
If you purchase the optional Big Agnes footprint for your tent, it will enable you to pitch a Fast Fly shelter while leaving the tent body behind. The Fast Fly configuration requires the footprint, tent fly, poles and stakes.
1. Lay the footprint on the ground and stake out.
2. UL2, 3, 4 & 5 assemble the two poles: One main pole with a 4-way hub and one short straight crossover pole. UL1 assemble one main pole with two hubs the crossover pole is attached to the main pole. To ensure each pole section is fully seated insert each pole section into the next by hand, instead of allowing the shock cord to snap them together.
3. Position the assembled main pole on top of the footprint. Match the colors of the pole ends with the matching colors of the webbing on the footprint.
4. Insert the pole tips into the grommets at the four corners of the footprint.
5. UL2, 3, 4 & 5 insert the tips of the crossover pole into the small pockets located on the underside of the fly.
6. UL2, 3, 4 & 5 with the crossover pole now attached to the fly drape the rainfly over the pole frame. UL1 drape the rainfly over the pole frame, then insert the tips of the crossover pole into the small pockets located on the underside of the fly.
7. Match the webbing colors on the fly with the matching colors of the webbing on the footprint.
8. Attach all Velcro® tabs on the underside of the fly to the corresponding pole sections for best stability.
9. Make sure the webbing at the corners of the rainfly is completely slackened. Attach the buckles on the fly to those on the footprint.
10. Tighten the webbing on each buckle as needed to keep the rainfly taut. 11. Stake out the vestibules then stake out all remaining guylines.
12. Low Vent Set Up: For increased ventilation, hook the cord located at the bottom of the vestibule door to the toggle at the top of the zipper located on the underside of the fly.
13. Awning Set Up: Unzip the two zippers at the head-end of the tent, attach extra guylines (included in stake bag) to corner cord loops, adjust trekking poles to desired height, insert trekking pole tips through grosgrain loop or cord loop on corners of panel. Stake out guylines.
HELPFUL HINTS FOR TENT SET UP
Our tents are easy to set up, but we suggest you practice once at home before using them for the first time to avoid late night bickering with tent mates while fumbling around in the dark.
Before pitching tent, clear campsite of debris that may pierce tent floor.
We recommend staking out all corners, vestibules and guylines to increase space and ventilation. Securely staking out your tent and all guylines is crucial to maintaining the structural integrity of your tent.
Hang onto your stuff sacks or they’ll blow away and create backcountry litter.
Pull on the pole sleeve fabric when inserting poles to avoid any bunching in the material.
Push rather than pull poles through pole sleeves.
Thanks for choosing a Big Agnes tent!
Please feel free to contact us if you have any questions or comments.
support.bigagnes.com | 877.554.8975
Descargar instrucciones de instalación